Pitney Bowes 9930 Operator'S Manual Download Page 77

Page: 77 / 187

5.2.2 Deleting/Adding a Speed Dial Number from a One Touch Key

If you want to delete the Speed Dial numbers stored in a One Touch Key:

Do This

10. Select another One Touch Key to work with and follow

from Step #4, or press NO.

After pressing NO, a One Touch Directory will print

automatically and the display will return to:

This Happens

ONE TOUCH DIRECTORY

PRINTING NOW

JAN 15 1998 10:00

SYSTEM READY

Do This

1. Press FUNCTION.

2. Enter 6 and then YES.

3. Press YES.

4. Press the One Touch Key you want to delete Speed

Dial numbers from. Example: 08.

5. Press NO.

NOTE: Be careful. If you press YES at this point, all Speed
Dial numbers stored under this One Touch Key will be
deleted.

6. Press YES and scroll (using COMM STAT Key) to

specify the Speed Dial number you wish to delete from
this One Touch Key. Example: 60

7. Press YES.

8. Press YES to delete this number.

This Happens

The number is deleted.

FUNCTION SELECT?
ENTER FUNCTION #_

SET ONE TOUCH?
ENTER YES OR NO

SELECT ONE TOUCH KEY

DELETE?

#08: SOUTHERN REGION

ENTER NAME

#08: SOUTHERN REGION

ENTER SPEED DIAL #
060:NEW ORLEANS

DELETE?

060:NEW ORLEANS

ADD ANOTHER NUMBER

TO THIS KEY?

Summary of Contents for 9930



























































































































































































Search results

Summary of Contents for 9930

Reviews:

Related manuals for 9930

Brands by name

Popular brands

Pitney Bowes 9930, Operator'S Manual

Search results

Summary of Contents for 9930

Reviews:

Related manuals for 9930

Brands by name

Popular brands