Other connections
08
74
En
Using the MULTI-ZONE controls
The following steps use the front panel controls to adjust
the sub zone volume and select sources.
1
See
MULTI-
ZONE remote controls
on page 74.
1
Press ZONE2 or ZONE3 to select the desired zone
(room).
The zone turns on and off each time the corresponding
button is pressed. It is possible to turn both on.
2
Press CTRL to select the sub zone(s) you want.
2
If you selected
ZONE 2 ON
and
ZONE 3 ON
above, you
can toggle among
ZONE 2
,
ZONE 3
and
ZONE 2&3
.
• When the receiver is on,
3
make sure that any
operations for the sub zone are done while
ZONE
and
your selected sub zone(s) show in the display. If this
is not showing, the front panel controls affect the
main zone only.
3
Use the INPUT SELECTOR dial to select the source
for the zone you have selected.
For example,
ZONE 2 CD-R
sends the source connected
to the
CD-R
inputs to the primary (
ZONE 2
) sub room.
• If you select
TUNER
, you can use the
TUNER
controls
to select a preset station (see
Saving station presets
on page 43 if you’re unsure how to do this).
4
4
Use the MASTER VOLUME dial to adjust the
volume.
This is only possible if you selected the
VARIABLE
volume control in
ZONE Audio Setup
on page 104.
5
5
When you’re finished, press CTRL again to return to
the main zone controls.
You can also press the
ZONE 2
or
ZONE 3
button on the
front panel to switch off all output to the sub zone(s).
6
MULTI-ZONE remote controls
Set the MULTI-ZONE operation switch to
ZONE 2
or
ZONE 3
to operate the corresponding zone.
The following table shows the possible MULTI-ZONE
remote controls:
Connecting an IR receiver
If you keep your stereo components in a closed cabinet or
shelving unit, or you wish to use the sub zone remote
control in another zone, you can use an optional IR
receiver (such as a Niles or Xantech unit) to control your
system instead of the remote sensor on the front panel of
this receiver.
7
Note
1 When you use
ZONE 3
, you must set
ZONE 3 / RECSEL Setting
in the ZONE Audio Setup menu to
ZONE 3
(page 104).
2 Note that when recording, this also selects the
RECOUT
input source. See
Making an audio or a video recording
on page 109 for more on this.
3 If the receiver is in standby, the display is dimmed, and
ZONE
and your selected sub zone(s) continue to show in the display.
4 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone.
Please be careful not to change stations when recording a radio broadcast.
PHONES
SPEAKERS
AUTO SURROUND
/STREAM DIRECT
STATUS
LCD
VIEW
DIMMER
TUNER EDIT
BAND
CTRL
ZONE2
ZONE3
VIDEO/GAME 2 INPUT
DIGITAL IN
S-VIDEO
VIDEO
L
R
AUDIO
MULTI-ZONE CONTROL
MCACC
SETUP MIC
USB
(TUNE)
(TUNE)
PARAMETER
SETUP
(ST)
(ST)
AUDIO
VIDEO
RETURN
ENTER
CTRL
ZONE2
ZONE3
MULTI-ZONE CONTROL
SC-09TX
MASTER
VOLUME
STANDBY/ON
INPUT
SELECTOR
R1
R2
R3
R4
R5
ACTIVE MONITOR
L5
L4
L3
L2
L1
MASTER
VOLUME
INPUT
SELECTOR
5 The volume levels of the main and sub zones are independent.
6 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.
• If you don’t plan to use the MULTI-ZONE feature for awhile, turn off the power in both the sub and main rooms so that this receiver is in standby.
Button
What it does
Switches on/off power in the currently selected sub
zone.
INPUT
SELECT
Use to select the input source in the currently
selected sub zone.
Input
source
buttons
Use to select the input source directly (this may not
work for some functions) in the currently selected sub
zone.
VOL +/–
Use to set the listening volume in the currently
selected sub zone.
7 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.
• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.
• Connections using up to four devices and IR receivers can be made with this receiver.
SC_09TX.book Page 74 Monday, November 26, 2007 10:32 PM
Summary of Contents for SC-09TX - Elite AV Network Receiver
Page 1: ...uctions REC ...
Page 160: ......