Additional information
14
130
En
iPod messages
XM radio messages
Symptom
Cause
Action
Error I1
There is a problem with the signal path from the
iPod to the receiver.
Switch off the receiver and reconnect the iPod to the receiver.
If this doesn’t seem to work, try resetting your iPod.
Error I2
The software version being used with the iPod
needs to be updated.
Update the software being used with the iPod (please use the
latest iPod software versions later than the iPod updater 2004-
10-20).
Error I3
When operation is not possible with the iPod
operation mode set to
Type 1
.
Switch the iPod operation mode set to
Type 2
(page 62).
When the iPod software version is too old.
Update the iPod software to the latest version.
Error I4
When there is no response from the iPod.
Update the iPod software to the latest version.
No Music Track
There are no playable songs currently stored in
the iPod.
Input some music files compatible with iPod playback. When
you want to play videos, press
iPod CTRL
to play the video
track using the controls on the iPod.
No Track
When there are no tracks in the category
selected on the iPod.
Select a different category.
Symptom
Cause
Action
Check XM Tuner
The XM Mini-Tuner is not installed in the XM
Mini-Tuner Dock or the XM Mini-Tuner dock is
not connected to this receiver.
Confirm the XM Mini-Tuner is fully seated in the dock and
check the XM Mini-Tuner dock cable is connected to this
receiver.
Check Antenna
The XM antenna is not connected to the XM Mini-
Tuner Dock or the XM antenna cable has become
damaged.
Check that the XM antenna is securely connected to the XM
Mini-Tuner Dock and check the antenna cable for damage.
Replace the XM antenna if the cable is damaged.
Loading
The XM Mini-Tuner is acquiring audio or
program information from the XM satellite
signal. This message can also occur in weak XM
signal conditions.
This message should disappear in a few seconds in good
signal conditions. If you see this message often, reposition
the XM antenna to get better signal reception.
No Signal
The XM Mini-Tuner is not receiving the XM
satellite signal. Something may be blocking the
XM antenna’s view of the satellites or the
antenna is not properly aimed.
Check for antenna obstructions and reposition the XM
antenna to get better signal reception.
See instructions supplied with the XM Mini-Tuner and Dock
for antenna installation information.
Off Air
The XM channel you selected is not currently
broadcasting.
Check back at a later time; in the mean time, select another
channel.
CH Unauthorized
You may be attempting to tune to an XM channel
that is blocked or that you cannot receive with
your XM subscription package.
Consult the latest channel guide at www.xmradio.com for the
current list of channels. For information on receiving this
channel, visit www.xmradio.com or contact XM Satellite
Radio at 1-800-967-2346.
CH Unavailable
The selected channel is not available. The
channel may have been reassigned to a different
channel number.
This message may occur initially with a new
radio or a radio that has not received XM’s signal
for an extended period.
Consult the latest channel guide at www.xmradio.com for the
current list of channels. For cases of a new radio or a radio
that has not received XM’s signal for an extended period,
allow the radio to receive the XM satellite signal for at least 5
minutes and then try to select the channel again.
– – – – – – – –
No artist name or song title is available for this
selection.
No action required
Upgrade XM Tuner
An old type of tuner is connected.
Use an XM Mini-Tuner.
XM Power Error
A short-circuit occurring in the antenna or
surrounding antenna cable.
Make sure that there is nothing unusual with the antenna or
antenna cable. Switch the power off, then back on again.
SC_09TX.book Page 130 Monday, November 26, 2007 10:32 PM
Summary of Contents for SC-09TX - Elite AV Network Receiver
Page 1: ...uctions REC ...
Page 160: ......