Additional information
14
129
En
“The list could not be acquired.”
appears on the Server List
screen.
• Refer to the possible solutions provided for “No servers are found”.
• If the above does not solve the problem, try turning a off on the remote control unit then turn TV a on on
the plasma display.
A communication error message
appears.
• Refer to the possible solutions provided for “No servers are found”.
• If the above does not solve the problem, try turning a off on the remote control unit then turn TV a on on
the plasma display.
Home Media Gallery/PLAYBACK
Image or sound is interrupted or
distorted (Block noise appears).
• Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable quality
when cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback quality and
display speed.
• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.
• Check if the file complies to the supported format, bit rate or profile. Also check if the file is damaged.
• When connected by a wireless LAN, check if the bit rate is sufficient.
• Some files that comply with the supported format may not be played back or displayed.
Cannot play or display.
• Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable quality
when cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback quality and
display speed.
• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.
• Check if the file complies to the supported format, bit rate or profile. Also check if the file is damaged.
• Check if the leasing contract for the server has expired.
• When connected by a wireless LAN, check if the bit rate is sufficient.
• Some files that comply with the supported format may not be played back or displayed.
• It takes time to capture and display a large-sized image. If this is the case, no operation may be performed.
• See the Pioneer website (www.pioneerelectronics.com) for the formats that are supported.
Home Media Gallery/FIRMWARE
No updates are possible on USB. • Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged
(power unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files,
and if the speed of the device is sufficient (poor device speed may result in interrupted or delayed display of
images due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant,
insert the Flash Memory card into the multi-card reader.
• Confirm that the device is correctly inserted or removed.
• Check that the firmware file has been correctly downloaded. Also check the file size.
• See the Pioneer website (www.pioneerelectronics.com) for details.
Home Media Gallery/USB
USB devices are not properly
recognized.
• Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged
(power unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files,
and if the speed of the device is sufficient (poor device speed may result in interrupted or delayed display of
images due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant,
insert the Flash Memory card into the multi-card reader.
• Confirm that the device is correctly inserted or removed.
• No USB hub is supported. When you connect a home network, connect directly to the device’s USB port.
Image or sound is interrupted or
distorted (Block noise appears).
• Verify that the file complies with the supported format, bit rate or profile. Also check the file for damage.
• Some files that comply with the supported format may not play back or display properly.
• Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged
(power unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files,
and if the speed of the device is sufficient (poor device speed may result in interrupted or delayed display of
images due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant,
insert the Flash Memory card into the multi-card reader.
Home Media Gallery/Slide Show
Slideshow (photo content)
doesn’t start.
• Check if the receiver is placed into the pause or rotation mode. If that is the case, press
or
ENTER
to
start the slideshow.
Next picture does not appear in
the slideshow.
• The time needed to display a picture may be longer than the time set to display in Slide Show settings.
Reduce the picture size using a PC and try again.
• Slide Show only displays the supported files. If there is only one supported file, that file will remain on the
display and not display any other files.
Symptoms
Causes
SC_09TX.book Page 129 Monday, November 26, 2007 10:32 PM
Summary of Contents for SC-09TX - Elite AV Network Receiver
Page 1: ...uctions REC ...
Page 160: ......
