83
En
Connection/etc.
Precautions when connecting the player
This player’s Analog copy protect technology is copy
guarded. If you connect the player to a TV via a VCR,
or record and playback the contents of a disc with a
VCR, the playback picture may not be normal.
Connecting the player
How to display total
hours played and
power on time
DVD
.
I
Video CD
.
I
CD
.
This unit is capable of displaying the total play time and power
ON time as the working condition and maintenance timing
information.
The play time and power ON time can be displayed as de-
scribed below.
1.
Press and hold
DISPLAY
on the front panel of the
main unit before turning power ON, and
press
STANDBY
ON
.
2.
The screen shows the following:
3.
When an operation (playback from the re-
mote, for example) is performed, the time
information display disappears and normal
operation starts.
NOTE
÷
As the time is measured by the CPU clock, the information
includes an error of up to 2%.
÷
This is not capable of turning the total play time and power
ON time as the working condition and maintenance timing
information to 0.
OPERATING TIME
POWER ON 00105:46
PLAY
00078:13
Total play time, which is 78
hours 13 munites in this
example.
Power on time, which is
105 hours 46 munites in
this example.
Right
Left
✩
✩
✩
÷
Connect plugs to the terminals that match the plug’s color
(white, red, yellow).
÷
Align the plug with the connector in the proper orientation
and insert, then tighten the lock screws.
÷
Align the plug properly with the tab on the connector, and
press in carefully, then rotate to the right to lock.
✩
Cables can be found at your local audio/video dealer.
÷
Connect the TV with S-VIDEO terminal to the S-VIDEO
output terminal of this player.
screw
Video output
Audio output
Interface connector (RS-232C)
S-video output
External Sync input (BNC)/Video output (BNC)/
Component video output (BNC)
Advanced Operations
