80
En
DVD
.
Grouping blackboards
Blackboards can be registered by dividing them into groups
according to the disc and title to enable selective use later.
This makes it possible to store drawn characters and pictures
in positions matching the played images.
Pictures and characters comprising groups are also stored
as steps.
When executing the blackboards, arbitrary registered black-
board groups can be selected and displayed. Groups also
can be deleted.
Selecting a group is done as follows.
When “DISPLAY AREA IN OUT” is displayed on the screen
or when the
‰
(pointer) is displayed to the left of GROUP, the
group that you want can be selected by clicking on the NEXT
or PREV display with the mouse.
The group can be entered by selecting it and clicking on SAVE
on the screen.
DVD
.
To select the group
1.
Press
RECALL
twice.
÷
The step section blinks.
÷
The step section should continue displaying 000.
÷
When the step is 000, the entire group will be executed.
÷
When a step is selected, only the selected step in the
group will be executed.
2.
Press
PREV
.
÷
Group part blinks.
3.
Input the number of the group to be recalled/
executed using the numeric buttons.
4.
Press
NEXT
twice.
÷
This starts execution according to the selected black-
board.
DVD
.
To execute steps in a group
1.
Press
RECALL
twice.
2.
Press
PREV
if you want to switch the group.
÷
If you do not want to change the group, go to step 5
below.
3.
Input the number of the group to be recalled/
executed using the numeric buttons.
4.
Press
NEXT
.
5.
Input the number of the step to begin ex-
ecution using the numeric buttons.
6.
Press
NEXT
.
÷
This starts execution of the selected step in the selected
group.
÷
The step setup is released after the step has been ex-
ecuted.
Grouping video blackboards
BLACKBOARD GROUP 001: 000
BLACKBOARD GROUP 001: 000
GROUP 001
001 R–1,
02-002.41~032.06
A
002 B–3
01-027.30~035.08
A
YLW
GRN
Step
Group
Select the group
Select the step
NOTE
The system cannot enter this mode during display of the player
control panel.
