81
En
Advanced Operations
DVD
.
Recalling/executing
previously input blackboards
while observing their list
1.
Press
RECALL
twice.
2.
Press
DISPLAY
.
÷
This displays a list of commands.
3.
Select a group by pressing
PREV
NEXT
.
4.
Select a step by pressing
.
5.
Press
ENTER
.
NOTE
Press
CLEAR
to clear the characters or pictures being displayed.
However, characters and pictures that have been set with the
AUTO DISP
cannot be cleared with
CLEAR
.
Display of the recalled characters and pictures
Characters and pictures recalled by “Executing an entire group”
are not displayed in the order they were registered but in or-
der of the locations of the set display start points. When a
characters or picture is displayed while another character or
picture is already displayed, the newly displayed character/
picture is superimposed above the existing character/picture,
and all characters/pictures are displayed until the last display
end point among the set display end points.
÷
When pictures A and B are displayed, picture B appears
after the display of picture A has ended.
÷
When pictures A and C are displayed, picture C appears
above picture A which is already displayed, and the display
of pictures A and C ends at the picture C end point.
÷
When pictures C and D are displayed, picture D appears
above picture C which is already displayed, and the display
of pictures C and D ends at the picture C end point.
GROUP 001
001 R–1,
02-002.
41~032.06
A
002 B–3,
01-027.
30~035.08
A
Example
Time Flow
(Start point)
(End point)
(Start point)
(End point)
(Start point)
(End point)
(Start point)
(End point)
YLW
GRN
Select the group
Select the step
