63
En
Advanced Operations
Example 5) To input the command for setting Subtitle 1,
Audio 2 and Angle 3
÷
With a play command that specifies the start and end frames,
it is not possible to set the subtitle, audio and angle simulta-
neously. However, by placing the subtitle, audio and angle
setting command as described above before the frame sec-
tion play command, the section playback can be executed
with the specified setting.
The input as shown above allows to play title 3 frames 10000
to 15000 by setting Subtitle 1, Audio 2 and Angle 3.
With commands other than the frame section play command,
such as the frame search, chapter search and chapter sec-
tion play commands, the specified setting is valid within each
command.
Example 6) To repeat “Play Title 3 frames 123000 to
129000” in Example 3
1. When the word TITLE is blinking, enter
“00” in the TITLE.
÷
(Do not press
NEXT
.).
2. Press
SUBTITLE
while the TITLE digits are
blinking.
3. When the SUBTITLE digits start to blink,
press
1
then
NEXT
.
4. When the AUDIO digit starts to blink,
press
2
.
5. When the ANGLE digital starts to blink,
press
3
.
1. Perform steps 1 to 4 in Example 3.
÷
The barcode/command stack input screen of the next
step appears.
2. Press
RPT A-B
while the TITLE number is
blinking.
÷
The REPEAT indicator appears on the screen.
BC/COMMAND STACK GROUP 001: 001
TITLE
00
SEARCH FRAME
000000
MARK
FRAME
- - - - - -
SUBTITLE
01
AUDIO
2
ANGLE
3
SAVE DEL
INS
EXIT
BC/COMMAND STACK GROUP 001/ 001
001 SUBTITLE 01 AUDIO 2 ANGLE 3
002 03:10000–15000
003
004
005
006
007
008
SAVE DEL
INS
EXIT
Press
DISPLAY
switches over to
the following display
Item display
List display
1.
2.
BC/COMMAND STACK GROUP 001: 001
TITLE
03
SEARCH FRAME
123000
MARK
FRAME
129000
SAVE DEL
INS
EXIT
BC/COMMAND STACK GROUP 001: 002
TITLE
00
SEARCH FRAME
000000
MARK
FRAME
- - - - - -
SUBTITLE
*
AUDIO
*
ANGLE
*
SAVE DEL
INS
EXIT
BC/COMMAND STACK GROUP 001: 002
REPEAT
