manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

Share
Download
Pioneer LD-V4400 Level I User Manual Download Page 77

NOTE:

If a CLV disc without extended time code (seconds and frame
numbers encoded) is being played, the player will search to the
beginning frame of the minute.  This means the player will search
to 56 minutes and pause immediately, even if it is set to frame
mode and the command 5 6 3 4 1 2 S E <CR> is sent to the player.

When using the RU-V103 remote control unit to send a Search
command when a CLV disc is loaded, the LD-V4400 will search to
the specified address and immediately play.   

If a <CR> is sent to the player from the computer or controller
before a search is completed, the player will behave as if a CL
command were sent.   

16)

MULTI-TRACK JUMP FORWARD  (CAV Only) 

17)

MULTI-TRACK JUMP REVERSE  (CAV Only) 

Function:

Jump the designated number of tracks.

Format:

Argument J F - Jump Forward
Argument J R - Jump Reverse

Explanation:

When this command is sent to player, the player jumps in either a
forward or reverse direction by the number of tracks described in
the argument. Compared to the search command, which is an
absolute address search ending in 

Still Mode

, track jump is a

relative address search and does not change the player mode
operating at the time the command is sent. The argument is
limited to 99999.  If the jump ends in the lead-in or lead-out area,
the player will stop at the outer-most or inner-most frame in the
program area.

If the track jump distance is within ±100 frames, then no
apparent video disturbance is seen. It is possible to track jump
forward or reverse more than 100 frames, but video disturbance
will be apparent.

The player mode does not change after track jump is executed and
a completion status is returned after the jump is completed.

Execution:

*  Play Mode (at frame 1000)
1 0 0 J F <C/R>

R <C/R>

*  Play Mode (from 1100)

NOTE:

This command cannot be executed if a CLV disc is being played. 
If a Track Jump Forward or Reverse command is sent while a CLV
disc is playing, an error E04 is returned. 

LD-V4400  Level I & III • Chapter Four

LD-V4400  Level  I & III User’s Manual

TP 116

v1.1 • 9/93

4-19

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands