manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

The Pioneer LD-V4400 Level I User Manual is a comprehensive guide that enables users to maximize their experience with this cutting-edge product. With easy-to-understand instructions and diagrams, this manual covers all aspects of operation and troubleshooting. Download it for free from manualshive.com to enhance your Pioneer LD-V4400 Level I experience.

Share
Download
background image

LD-V4400 Remote Control Unit

RU-V103

RU-V103 Remote Control:

REJECT: 

Ceases playback and spins-down the disc.

PAUSE: 

Ceases playback and presents a squelch

screen. Press any motion button to resume.

PLAY: 

Begins playing a disc, or resumes play.

REPEAT MODE: 

This button can be pressed to select

auto return, side repeat; or chapter repeat may be
selected while a specific chapter is playing.

STILL STEP (FWD / REVERSE): 

Press either of

these buttons to produce a still video image (CAV).
Additional presses of the STEP FWD button moves the
image forward one frame at a time. STEP REV moves
the image in reverse one frame at a time. 

DISP: 

Displays or removes the display of current

chapter/frame/or time numbers on the screen.

SCAN (FWD / REVERSE):

Press either of these

buttons to move quickly forward or backward through
program material on the disc. Rapid scanning
continues as long as the button is depressed. 

AUDIO: 

Press this button to select audio output:

Digital Stereo, Digital 1/L, Digital 2/R, Audio OFF,
Analog Stereo, Analog 1/L, Analog 2/R, Audio OFF. 

SPEED (DOWN  / UP): 

Press these buttons to set the

speed at which multi-speed play will occur.

CLEAR: 

Press this button to CLEAR erroneous inputs

or to stop a Search operation.

MULTI-SPEED (REV / FWD): 

Press this button to

play forward or reverse in the speed that is set with the
SPEED button (CAV).

NUMERIC BUTTONS (0-9): 

Use these buttons to

enter locations on the disc for searches. (eg. Enter 
1000 SEARCH to move to a certain frame (CAV) or time
(CLV) location on the disc.) Use the CHAP/FRAME
TRACK/TIME button to set an “address flag”,
indicating chapter, frame number or time. (These
buttons can also be used for viewer responses during
Level III program execution.) See Level III Command
Input Number Wait (?N).

SEARCH: 

Specify the number to be searched to by

using the digit buttons. Press the SEARCH button to
execute.  (First set the “address flag” using the CHAP/

LEVEL I CONTROL 

FRAME TRACK/TIME button.) After searching, the
player presents a still frame on CAV discs or immediately
plays on CLV discs.

CHAP / FRAME TRACK / TIME: 

Press this button to

set the address flag, indicating how a search will be
performed, either by chapter or frame number (CAV), or
chapter or time number (CLV).  

See 

Section 3.2.2

, page 3-4, for

details about the use of each specific

remote control button.

The RU-V103 Remote Control Unit

Appendix B LD-V4400 Remote Control Unit

TP 116

v1.1 • 9/93

B-1

Note: The RU-V103 Remote Control Unit is not packaged with a cable for connection to the LBC Terminal on the front of the 
LD-V4400. A stereo or mono mini-plug cable can be purchased separately, however, and used to provide the wired connection.

LaserDisc

?

?

?

?O2@@@f?@@6K?

?

?W2@@@@@f?@@@@6K?

?

O&@@@@@@f?@@@@@@6X?

?

W2@@@@@@@@f?@@@@@@@)X

?

7@@@@@@@@@f?@@@@@@@@)X?

?

?J@@@@@(Y@@@f?@@@@@@@@@1?

?

W&@@@@(Y?@@@f?@@@V'@@@@@Lhe@@@@@@@@@@@@@@@@@@@@@@@6X??@@@@@@@@@fO2@@@@@@@@@@@@@@@@6Ke?@@@@@@@@@@6X?h@@@@@?eW2@@@@@@@@@@@@@@@@@@@@@(eO2@@@@@@@@@@@@@@@@@@@@(?@@@@@@@@@@@@@@@@@@@@@@@6K?e@@@6X?e?

7@@@@(Y??@@@f?@@@?V'@@@@)X?hN@@@@@@@@@@@@@@@@@@@@@@@)X?N@@@@@@@@eW2@@@@@@@@@@@@@@@@@@@@@??N@@@@@@@@@@)Xh@@@@@??W&@@@@@@@@@@@@@@@@@@@@@(Y?@@@@@@@@@@@@@@@@@@@@@@(Y?N@@@@@@@@@@@@@@@@@@@@@@@@@e@@@@1?e?

@@@@(Ye?@@@f?@@@eV'@@@@1?h?@@@@@@@@@@@@@@@@@@@@@@@@1e@@@@@@@@e7@@@@@@@@@@@@@@@@@@@@@@Le@@@@@@@@@@@)X?g@@@@@??7@@@@@@@@@@@@@@@@@@@@@(Y?J@@@@@@@@@@@@@@@@@@@@@(Ye?@@@@@@@@@@@@@@@@@@@@@@@@@L?@@@@@?e?

?J@@@@H?e?@@@f?@@@e?N@@@@@?h?@@@@@@@@@@@@@@@@@@@@@@@@@e@@@@@@@@e@@@@@@@@@@@@@@@@@@@@@@@1e@@@@@@@@@@@@1?g@@@@@??@@@@@@@@@@@@@@@@@@@@@0Ye7@@@@@@@@@@@@@@@@@@@@0Y?e?@@@@@@@@@@@@@@@@@@@@@@@@@1?@@?@5?e?

?7@@@@f?@@@f?@@@f@@@@@?h?@@@@@@@@?hI'@@@@@@L?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@?@@@@@@@@Lg@@@@@?J@@@@@@@

@@@@@@@?

?@@@@@@@@?he@@@@@@@?@@@0Y?e?

?@@@@5f?@@@f?@@@f3@@@@Lh?@@@@@@@@?h?N@@@@@@1?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@?3@@@@@@@)X?f@@@@@?7@@@@@@@

@@@@@@@?

?@@@@@@@@?he@@@@@@@?h?

?@@@@Hf?@@@f?@@@fN@@@@1h?@@@@@@@@?he@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@?V'@@@@@@@1?f@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?he@@@@@@@?h?

?@@@@?f?@@@f?@@@f?@@@@@h?@@@@@@@@?he@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@eV'@@@@@@@Lf@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?h?J@@@@@@@?h?

?@@@@?f?@@@f?@@@f?@@@@@h?@@@@@@@@?h?J@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@e?N@@@@@@@)X?e@@@@@?@@@@@@@@e@@@@@@@@@@@@(?e@@@@@@@??W2@@@@@@@@@@@f?@@@@@@@@?hO&@@@@@@@?h?

?@@@@Lf?@@@L?eJ@@@fJ@@@@@h?@@@@@@@@?hW&@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@f@@@@@@@@)Xe@@@@@?@@@@@@@@e@@@@@@@@@@@(Y?e@@@@@@@?W&@@@@@@@@@@@Hf?@@@@@@@@??'@@@@@@@@@@@@@@5?h?

?@@@@1f?@@@)K?O&@@@f7@@@@5h?@@@@@@@@?g?O&@@@@@@@5?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@f3@@@@@@@@1e@@@@@?@@@@@@@@@@@@@@@@@@@@(Yf@@@@@@@W&@@@@@@@@@@@@?f?@@@@@@@@??V'@@@@@@@@@@@@(Y?h?

?@@@@@f?@@@@@@@@@@5f@@@@@Hh?@@@@@@@@@@@@@@@@@@@@@@@@@H?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@fV'@@@@@@@@L?@@@@@?@@@@@@@@@@@@@@@@@@@0Y?f@@@@@@@@@@@@@@@@@@0Mg?@@@@@@@@?eV'@@@@@@@@@@0Yhe?

?3@@@@L?e?@@@@@@@@@@He?J@@@@@?h?@@@@@@@@V'@@@@@@@@@@@@@@5e@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@f?V'@@@@@@@)X@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?e?V'@@@@@@@@?hf?

?N@@@@)Xe?@@@@@@@@@5?eW&@@@@@?h?@@@@@@@@?V4@@@@@@@@@@@@0Ye@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@gV'@@@@@@@@@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?fV'@@@@@@@Lhf?

@@@@@)X?eI'@@@@@0Y??W&@@@@@5?h?@@@@@@@@?

@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@g?N@@@@@@@@@@@@@?3@@@@@@@

@@@@@@@?

?@@@@@@@@?f?N@@@@@@@)X?he?

3@@@@@)Xe?V'@@@fW&@@@@@(Y?h?@@@@@@@@?

@@@@@@@@e@@@@@@@LhJ@@@@@@@e@@@@h3@@@@@@@@@@@@?N@@@@@@@L?

@@@@@@@L

?@@@@@@@@?g3@@@@@@@)Xhe?

V'@@@@@)K?eN@@@e?O&@@@@@@Hhe?@@@@@@@@?

@@@@@@@@e@@@@@@@)K?f?O&@@@@@@5e@@@@hV'@@@@@@@@@@@??@@@@@@@)K

?C@@@@@@@)K?

?@@@@@@@@?gN@@@@@@@@1he?

?V'@@@@@@6K??@@@?@@@@@@@@@5?he?@@@@@@@@?

@@@@@@@@e3@@@@@@@@@@@@@@@@@@@@@@He@@@@h?N@@@@@@@@@@@??3@@@@@@@@@@@@@@@@@@@@@@@(Y@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?g?@@@@@@@@@L?h?

N@@@@@@@@@?@@@?@@@@@@@@(Y?he?@@@@@@@@?

@@@@@@@@eV'@@@@@@@@@@@@@@@@@@@@5?e@@@@L?h3@@@@@@@@@@??V'@@@@@@@@@@@@@@@@@@@@@(Y?3@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?h?@@@@@@@)Kh?

?@@@@@@@@@?@@@?@@@@@@@@Yhf?@@@@@@@@?

@@@@@@@@e?V4@@@@@@@@@@@@@@@@@@0Y?e@@@@1?hV4@@@@@@@@@LeV4@@@@@@@@@@@@@@@@@@@(Y??V4@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?h?@@@@@@@@@@?g?

'@@@@@@@@@@@?@@@?@@@@@@@@@@@he?@@@@@@@@?

@@@@@@@@f?I4@@@@@@@@@@@@@@0M?f@@@@@?heI4@@@@@@@@fI4@@@@@@@@@@@@@@@@0YgI4@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?

?

V'@@@@@@@@@@?@@@?@@@@@@@@@@H

?

?V4@@@@@@@@@?@@@?@@@@@@@@@@?

?

?

?

?

VIDEO DISC PLAYER

REMOTE CONTROL UNIT RU-V103

REJECT

PLAY

PAUSE

REPEAT

MODE

STILL / STEP

REV

FWD

DISP

SCAN

REV

FWD

AUDIO

SPEED

DOWN

UP

CLEAR

MULTI

REV

FWD

7

9

8

4

6

5

1

3

2

0

CHAP/

FRAME

TRACK/

TIME

SEARCH

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Related manuals for LD-V4400 Level I

Panasonic SLCT570 - PORT. CD PLAYER Operating Instructions Manual preview
SLCT570 - PORT. CD PLAYER
Brand: Panasonic Pages: 8
Panasonic SLMP35 - PORT. CD PLAYER Operating Instructions Manual preview
SLMP35 - PORT. CD PLAYER
Brand: Panasonic Pages: 8
Panasonic WJ-ND400K Quick Reference Manual preview
WJ-ND400K
Brand: Panasonic Pages: 4
Panasonic RQE20V - PERSONAL STEREO-LOW Operating Instructions preview
RQE20V - PERSONAL STEREO-LOW
Brand: Panasonic Pages: 5
Panasonic SJ-MR220 Schematic Diagrams preview
SJ-MR220
Brand: Panasonic Pages: 8
Panasonic RQSX77V - PERSONAL STEREO Operating Instructions preview
RQSX77V - PERSONAL STEREO
Brand: Panasonic Pages: 4
Panasonic CQ-C7305N Operating Instructions Manual preview
CQ-C7305N
Brand: Panasonic Pages: 66
Panasonic WJ-HD88 Network Operating Instructions preview
WJ-HD88
Brand: Panasonic Pages: 49
Magnavox AZ1100 - Single Deck Istruzioni Per L'Uso preview
AZ1100 - Single Deck
Brand: Magnavox Pages: 16
Magnavox NB500MG9 Owner'S Manual preview
NB500MG9
Brand: Magnavox Pages: 50
Magnavox NB500MG1F - Blu-Ray Disc Player Specifications preview
NB500MG1F - Blu-Ray Disc Player
Brand: Magnavox Pages: 2
Magnavox AZ 8006 Owner'S Manual preview
AZ 8006
Brand: Magnavox Pages: 16
Magnavox MBP5320 Setup Manual preview
MBP5320
Brand: Magnavox Pages: 2
Magnavox MBP5230 Owner'S Manual preview
MBP5230
Brand: Magnavox Pages: 81
Magnavox MBP5130 Owner'S Manual preview
MBP5130
Brand: Magnavox Pages: 52
Magnavox MBP5120F Quick Start Manual preview
MBP5120F
Brand: Magnavox Pages: 2
Magnavox MBP5210 Specifications preview
MBP5210
Brand: Magnavox Pages: 2
Magnavox MBP1100 - Manual D'Utilisation preview
MBP1100 -
Brand: Magnavox Pages: 52

Brands by name

Popular brands

Load more brands