manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

The Pioneer LD-V4400 Level I User Manual is a comprehensive guide that enables users to maximize their experience with this cutting-edge product. With easy-to-understand instructions and diagrams, this manual covers all aspects of operation and troubleshooting. Download it for free from manualshive.com to enhance your Pioneer LD-V4400 Level I experience.

Share
Download
background image

LD-V4400 Level I & III • Chapter Two

LD-V4400  Level  I & III User’s Manual

TP 116

v1.1 • 9/93

2-5

• • • • • • • •

• • • • • • •

•

•

•

•

-1L

-2R

•

•

AUDIO OUT

VIDEO OUT

Power Cord

Connects to a wall

outlet (120V AC,  60 Hz).

I

nterface Connector / RS-232C Por

t

D-SUB 15 pin. Used for serial interface connection to a
computer or a controller.  See page 2-8 for details.

EXT SYNC IN / OUT Terminals

(BNC Jacks) IN connects to the sync generator when the

main unit is operated in external sync mode.  O. (OUT) can be daisy chained to the EXT.
SYNC IN terminal of the second player.  Set the EXT SYNC termination selector in accordance
with the conditions of use. 

VIDEO OUTPUT Terminals

(BNC Jack, RCA Jack) These

terminals are connected to the video input jack of a video monitor.

DIGITAL/ANALOG AUDIO OUT Terminals

(RCA Jacks) These two terminals output LaserVision
Disc analog audio or digital audio from LaserVision
Discs with Digital Sound. Connect these to the LD or
AUX input terminals of your stereo amplifier. Do not
connect them to your amplifier’s PHONO input. 

Power Indicator

LaserBarcode Terminal  

for wired connection to 

a Pioneer Barcode Reader (UC-V108BC, UC-V109BC)
or to a Remote Control (RU-V103).

Display  Button

Power-On / Off

Front Panel

Control

Buttons

LED Status Indicators

Disc Tray Door

•

•

•

Key Lock
Indicator

Remote Sensor

(LD-ROM, Busy, Park, Play, Search) 

for receiving infrared signals from the
LaserBarcode Reader or remote control.

LD-V4400 — Front Panel View

LD-V4400 — Rear Panel View

Figure 2-C

Figure 2-D

LD-ROM

On/Off

?

?

?

?O2@@@f?@@6K?

?

?W2@@@@@f?@@@@6K?

?

O&@@@@@@f?@@@@@@6X?

?

W2@@@@@@@@f?@@@@@@@)X

?

7@@@@@@@@@f?@@@@@@@@)X?

?

?J@@@@@(Y@@@f?@@@@@@@@@1?

?

W&@@@@(Y?@@@f?@@@V'@@@@@Lhe@@@@@@@@@@@@@@@@@@@@@@@6X??@@@@@@@@@fO2@@@@@@@@@@@@@@@@6Ke?@@@@@@@@@@6X?h@@@@@?eW2@@@@@@@@@@@@@@@@@@@@@(eO2@@@@@@@@@@@@@@@@@@@@(?@@@@@@@@@@@@@@@@@@@@@@@6K?e@@@6X?e?

7@@@@(Y??@@@f?@@@?V'@@@@)X?hN@@@@@@@@@@@@@@@@@@@@@@@)X?N@@@@@@@@eW2@@@@@@@@@@@@@@@@@@@@@??N@@@@@@@@@@)Xh@@@@@??W&@@@@@@@@@@@@@@@@@@@@@(Y?@@@@@@@@@@@@@@@@@@@@@@(Y?N@@@@@@@@@@@@@@@@@@@@@@@@@e@@@@1?e?

@@@@(Ye?@@@f?@@@eV'@@@@1?h?@@@@@@@@@@@@@@@@@@@@@@@@1e@@@@@@@@e7@@@@@@@@@@@@@@@@@@@@@@Le@@@@@@@@@@@)X?g@@@@@??7@@@@@@@@@@@@@@@@@@@@@(Y?J@@@@@@@@@@@@@@@@@@@@@(Ye?@@@@@@@@@@@@@@@@@@@@@@@@@L?@@@@@?e?

?J@@@@H?e?@@@f?@@@e?N@@@@@?h?@@@@@@@@@@@@@@@@@@@@@@@@@e@@@@@@@@e@@@@@@@@@@@@@@@@@@@@@@@1e@@@@@@@@@@@@1?g@@@@@??@@@@@@@@@@@@@@@@@@@@@0Ye7@@@@@@@@@@@@@@@@@@@@0Y?e?@@@@@@@@@@@@@@@@@@@@@@@@@1?@@?@5?e?

?7@@@@f?@@@f?@@@f@@@@@?h?@@@@@@@@?hI'@@@@@@L?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@?@@@@@@@@Lg@@@@@?J@@@@@@@

@@@@@@@?

?@@@@@@@@?he@@@@@@@?@@@0Y?e?

?@@@@5f?@@@f?@@@f3@@@@Lh?@@@@@@@@?h?N@@@@@@1?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@?3@@@@@@@)X?f@@@@@?7@@@@@@@

@@@@@@@?

?@@@@@@@@?he@@@@@@@?h?

?@@@@Hf?@@@f?@@@fN@@@@1h?@@@@@@@@?he@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@?V'@@@@@@@1?f@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?he@@@@@@@?h?

?@@@@?f?@@@f?@@@f?@@@@@h?@@@@@@@@?he@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@eV'@@@@@@@Lf@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?h?J@@@@@@@?h?

?@@@@?f?@@@f?@@@f?@@@@@h?@@@@@@@@?h?J@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@e?N@@@@@@@)X?e@@@@@?@@@@@@@@e@@@@@@@@@@@@(?e@@@@@@@??W2@@@@@@@@@@@f?@@@@@@@@?hO&@@@@@@@?h?

?@@@@Lf?@@@L?eJ@@@fJ@@@@@h?@@@@@@@@?hW&@@@@@@@?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@f@@@@@@@@)Xe@@@@@?@@@@@@@@e@@@@@@@@@@@(Y?e@@@@@@@?W&@@@@@@@@@@@Hf?@@@@@@@@??'@@@@@@@@@@@@@@5?h?

?@@@@1f?@@@)K?O&@@@f7@@@@5h?@@@@@@@@?g?O&@@@@@@@5?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@f3@@@@@@@@1e@@@@@?@@@@@@@@@@@@@@@@@@@@(Yf@@@@@@@W&@@@@@@@@@@@@?f?@@@@@@@@??V'@@@@@@@@@@@@(Y?h?

?@@@@@f?@@@@@@@@@@5f@@@@@Hh?@@@@@@@@@@@@@@@@@@@@@@@@@H?@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@fV'@@@@@@@@L?@@@@@?@@@@@@@@@@@@@@@@@@@0Y?f@@@@@@@@@@@@@@@@@@0Mg?@@@@@@@@?eV'@@@@@@@@@@0Yhe?

?3@@@@L?e?@@@@@@@@@@He?J@@@@@?h?@@@@@@@@V'@@@@@@@@@@@@@@5e@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@f?V'@@@@@@@)X@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?e?V'@@@@@@@@?hf?

?N@@@@)Xe?@@@@@@@@@5?eW&@@@@@?h?@@@@@@@@?V4@@@@@@@@@@@@0Ye@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@gV'@@@@@@@@@@@@@?@@@@@@@@

@@@@@@@?

?@@@@@@@@?fV'@@@@@@@Lhf?

@@@@@)X?eI'@@@@@0Y??W&@@@@@5?h?@@@@@@@@?

@@@@@@@@e@@@@@@@?h?@@@@@@@e@@@@g?N@@@@@@@@@@@@@?3@@@@@@@

@@@@@@@?

?@@@@@@@@?f?N@@@@@@@)X?he?

3@@@@@)Xe?V'@@@fW&@@@@@(Y?h?@@@@@@@@?

@@@@@@@@e@@@@@@@LhJ@@@@@@@e@@@@h3@@@@@@@@@@@@?N@@@@@@@L?

@@@@@@@L

?@@@@@@@@?g3@@@@@@@)Xhe?

V'@@@@@)K?eN@@@e?O&@@@@@@Hhe?@@@@@@@@?

@@@@@@@@e@@@@@@@)K?f?O&@@@@@@5e@@@@hV'@@@@@@@@@@@??@@@@@@@)K

?C@@@@@@@)K?

?@@@@@@@@?gN@@@@@@@@1he?

?V'@@@@@@6K??@@@?@@@@@@@@@5?he?@@@@@@@@?

@@@@@@@@e3@@@@@@@@@@@@@@@@@@@@@@He@@@@h?N@@@@@@@@@@@??3@@@@@@@@@@@@@@@@@@@@@@@(Y@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?g?@@@@@@@@@L?h?

N@@@@@@@@@?@@@?@@@@@@@@(Y?he?@@@@@@@@?

@@@@@@@@eV'@@@@@@@@@@@@@@@@@@@@5?e@@@@L?h3@@@@@@@@@@??V'@@@@@@@@@@@@@@@@@@@@@(Y?3@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?h?@@@@@@@)Kh?

?@@@@@@@@@?@@@?@@@@@@@@Yhf?@@@@@@@@?

@@@@@@@@e?V4@@@@@@@@@@@@@@@@@@0Y?e@@@@1?hV4@@@@@@@@@LeV4@@@@@@@@@@@@@@@@@@@(Y??V4@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?h?@@@@@@@@@@?g?

'@@@@@@@@@@@?@@@?@@@@@@@@@@@he?@@@@@@@@?

@@@@@@@@f?I4@@@@@@@@@@@@@@0M?f@@@@@?heI4@@@@@@@@fI4@@@@@@@@@@@@@@@@0YgI4@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?

?

V'@@@@@@@@@@?@@@?@@@@@@@@@@H

?

?V4@@@@@@@@@?@@@?@@@@@@@@@@?

?

?

?

?

LaserDisc

RS-232C

EXT SYNC Termination Selector

Use this switch to select the signal input to the EXT SYNC IN: 75

Ω 

termination within the player (ON

position) or looped through (OFF position). When using EXT SYNC IN only, set to ON. When looped through to daisy chain players using EXT
SYNC OUT, set to OFF.  Make sure the final player in the chain is set to ON.  NOTE: External synchronization is possible only during CAV disc
playback. Use an NTSC sync generator with compatible specifications; jitter and noise in the external sync signal may cause the player to
operate improperly. Establish sync before the player is powered-on or before it finishes Set Up Mode. Error will occur if the composite sync
signal enters the EXT SYNC IN after playback has started, or if the input to the EXT SYNC is interrupted during playback.

Laser Disc Player LD-V4400

O.  SYNC  IN

ON

OFF

75

Ω

EXT SYNC

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Related manuals for LD-V4400 Level I

Panasonic SV-SD05 Operating Instructions Manual preview
SV-SD05
Brand: Panasonic Pages: 8
Xtreamer media player Network Setup Manual preview
media player
Brand: Xtreamer Pages: 29
Yamaha S5770 Owner'S Manual preview
S5770
Brand: Yamaha Pages: 32
Samsung YP-Z3CP User Manual preview
YP-Z3CP
Brand: Samsung Pages: 52
E-matic EM304CAMB Manual preview
EM304CAMB
Brand: E-matic Pages: 22
Denon DCM-270 Operating Instructions Manual preview
DCM-270
Brand: Denon Pages: 28
ECG CDR 1000 Instruction Manual preview
CDR 1000
Brand: ECG Pages: 112
Tevion CD-8423 User Manual preview
CD-8423
Brand: Tevion Pages: 6
Logik L7PDT13E Instruction Manual preview
L7PDT13E
Brand: Logik Pages: 216
Villager VLN 1095 Original Instruction Manual preview
VLN 1095
Brand: Villager Pages: 146
great gadgets MP3 Piggy Bank Instruction Manual preview
MP3 Piggy Bank
Brand: great gadgets Pages: 6
Datavideo NVS-25 Instruction Manual preview
NVS-25
Brand: Datavideo Pages: 52
Farenheit DVD-16TM Owner'S Manual preview
DVD-16TM
Brand: Farenheit Pages: 30
Onda VX969 User Manual preview
VX969
Brand: Onda Pages: 26
Akiyama CDX-MP300 Instruction Manual preview
CDX-MP300
Brand: Akiyama Pages: 16
Coby CD-RA195 Operating Manual preview
CD-RA195
Brand: Coby Pages: 15
ID-AL My Music Player User Manual preview
My Music Player
Brand: ID-AL Pages: 96
LDA RCD21R User Manual preview
RCD21R
Brand: LDA Pages: 12

Brands by name

Popular brands

Load more brands