manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

Share
Download
Pioneer LD-V4400 Level I User Manual Download Page 60

In the command line, codes such as <SPACE> or <LF> (line feed) that do not affect
player operation are ignored.  The length of the command line is limited to the
buffer size. For the LD-V4400, the length of a command string is limited to 20
characters.  The <CR> or <LF> are not included in the buffer size.

When all the commands in a string are completely executed, the player transmits the
“completion” message.  (It sends an “R” <CR>.)  If an error occurs, an error message
such as E04 <CR> is returned by the player.  This indicates the error occurrence,
along with the error code. See 

Sec. 4.2 Error Messages

, page 4-3. 

The automatic return of an “R” following command execution is called 

Automatic

Status

.  

Automatic Status

is very useful when working with some computer

programs, because it allows the program to know the appropriate time to send the
next command.  If this function is not used, the command processing time must be
taken into consideration before the next command is sent. (To set Automatic Status
ON or OFF, see the Level III command for Communication Control on page 4-38.)

4.1.1  Request Status

When an error message is received, it may be necessary to determine the player’s
current status in order to continue a program.  A variety of conditions can occur
which may cause an error code to be sent.  Since actual hardware failure in the
player is a relatively rare event, other conditions may be detected which would
allow a program to recover and continue operation.  Even when there is no error,
there are occasions when player status or disc information is useful.  In such a
case, the 

Request Status

function can be used.  

The user may want to find out the current frame number even if there is no error.

Request Status

commands can be useful under these conditions. Fifteen 

Request

Status

commands are available on the LD-V4400.  The main 

Request Status

commands in Level III are as follows:

1) To know the active mode of the player:

?P

2) To know the current frame, time, or chapter number:

?F, ?T, ?C

NOTE: 

These and additional 

Request 

commands are described in 

Section 4.7.4 

on

page 4-31 through

Section 4.7.7

on page 4-47. 

The status functions are summarized below:

Chapter Four •  LD-V4400  Level I & III

Status Reporting

Automatic Status

Auto-Completion Message

Error Indication Message

Request Status

4-2

TP 116

v1.1 • 9/93

LD-V4400  Level  I & III User’s Manual

Figure 4-B

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands