manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

Share
Download
Pioneer LD-V4400 Level I User Manual Download Page 53

11) MULTI SPEED FWD / REV

Function:

Pressing this button plays the disc forward or reverse at a speed

determined by first using the SPEED SET button. 

Explanation:

This command is effective only when the player is in 

Random

Access Mode 

when a CAV disc is being played. If this button is pressed while a CLV

disc is playing, it will have no effect and the letters CLV will appear in the upper
right corner of the screen. The player plays forward or reverse at the speed set by
using the SPEED DOWN/UP button, if a search is not in progress. If the MULTI
SPEED command is sent while a search is in progress, the player completes the
search and immediately starts playing the CAV disc at the speed and in the
direction indicated. 

NOTE:

Audio is squelched and not output during a multi-speed play. This

command is ineffective on CLV discs. 

12) SEARCH

Function:

Pressing this button instructs the player to search for the address

specified by the argument. When the search is completed, the player displays a still
frame, if a CAV disc is being used. It immediately plays after the Search is completed,
if a CLV disc is being used. 

Explanation:

This command searches for the address specified by the argument.

Unless a button is pressed during the search, the player holds a still frame (on a
CAV disc) when the search is completed.  If the CLEAR button is pressed during a
search, the player stops the search when the CLEAR command is received and
holds a still frame (CAV) or plays (CLV).  If the REJECT button is pressed during a
search, the player stops the search and enters 

Spin-down Mode

.  If the PLAY or

MULTI-SPEED button is pressed, the player continues the search, then starts to
play or starts a multi-speed play after the search (CAV).  A search is executed
when a search address is written into the Search Register.  The player then
compares the current address with the address in the Search Register and moves
the pickup at high speed until the difference between the search address and the
current address becomes zero. 

NOTE: 

If an argument is set to a chapter number larger than the ones stored on the

disc, the player searches to the beginning of the chapter with the largest chapter
number.  If the argument is set to a frame number larger than the ones stored on the
disc, the player searches to the final frame number encoded on the disc. 

If the argument is set to a time number or an extended time number larger than the
ones stored on a CLV disc, the player searches to the highest time or extended time
number on the disc. The Player must be in 

Frame Mode

to access an extended time

number, which includes Hrs. Min. Sec. and Frame number.

Chapter Three •  LD-V4400  Level I & III

3-12

TP 116

v1.1 • 9/93 

LD-V4400  Level  I & III User’s Manual

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands