manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

The Pioneer LD-V4400 Level I User Manual is a comprehensive guide that enables users to maximize their experience with this cutting-edge product. With easy-to-understand instructions and diagrams, this manual covers all aspects of operation and troubleshooting. Download it for free from manualshive.com to enhance your Pioneer LD-V4400 Level I experience.

Share
Download
background image

Original Independent Commands

(Continued from previous page)

T

he final two original independent LaserBarcode commands are designed for use in barcode

development and testing.  The Debug On and Debug Off commands allow the barcode
developer to test printed barcodes to determine their accuracy.  They are described below:

13.

Debug On

-  Instructs the player to maintain various player settings so that barcodes

can be tested.  For example:  If the Display is turned on by the user through the remote
control unit or front panel button,  scanning Debug On will instruct the player  to
maintain that setting for subsequent barcode commands.  Normally, when barcodes are
transmitted to the player, the Display is turned off.  Debug On will also instruct the
player to maintain previously set video and audio attributes.  So, if the player is set to
stereo with the video on, these attributes will be maintained even if the barcode you
scan changes the attributes to a different setting.  Again, this is done so the developer
can test the accuracy of the general operation of the barcode.   

14.

Debug Off

- Instructs the player to disable the Debug On mode and allows exact

execution of the barcode as defined.  Debug Off need only be used if Debug On has
been previously set.

Extended Independent Commands 

(CAV or CLV discs, unless indicated)

15.

Start 

- Instructs the player to spin up the disc from a park position and pause 

at frame 1 (CAV discs) or time number 0:00:00 (CLV discs) with video squelched.

16.

Digital Stereo

- Sets the audio control attribute to "digital stereo," plays back left

and right digital audio channels simultaneously.

17.

Digital - Ch 1/Left 

- Sets the audio control attribute to "digital channel 1," plays

back digital left channel only.

18.

Digital - Ch 2/Right 

- Sets the audio control attribute to "digital channel  2," plays

back digital right channel only.

NOTE:

Many discs do not have digital audio.  Digital audio playback can only be

implemented if digital audio is encoded on the disc.  Please refer to the documentation for
the particular videodisc in use. 

NOTE:

The Slow Forward and Slow Reverse commands below can only be used with CAV discs. 

19.

Slow Forward 1*

- Instructs the player to play forward at 1/4 the normal speed.  

20.

Slow Forward 2

- Instructs the player to play forward at 1/8 the normal speed.  

21.

Slow Forward 3

- Instructs the player to play forward, displaying 1 frame / sec.  

22.

Slow Forward 4

- Instructs the player to play forward at 1 frame / 3 seconds.  

23.

Slow Reverse

1

- Instructs the player to play in reverse at 1/4 the normal speed.  

24.

Slow Reverse

2

- Instructs the player to play in reverse at 1/8 the normal speed.  

25.

Slow Reverse

3

- Instructs the player to play in reverse, displaying 1 frame / sec. 

26.

Slow Reverse

4

- Instructs the player to play in reverse at 1 frame / 3 seconds.

LaserBarcode Standard Commands & LaserBarcode Logo

Appendix D   LaserBarcode 2 Commands & LB Logo

TP 116

v1.1 • 9/93

D-7

* The Slow Forward and Slow Reverse speeds indicated are for Pioneer LB2 compatible players. These barcode
commands may execute differently on other manufacturers’ players because of the range of playback speeds allowed
within the LB2 standard.   See Note at bottom of page D-4. 

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Related manuals for LD-V4400 Level I

Samsung DVD-L300W User Manual preview
DVD-L300W
Brand: Samsung Pages: 32
Samsung DVD-L200 User Manual preview
DVD-L200
Brand: Samsung Pages: 32
Magnavox AZ1100 - Single Deck Istruzioni Per L'Uso preview
AZ1100 - Single Deck
Brand: Magnavox Pages: 16
Magnavox NB500MG9 Owner'S Manual preview
NB500MG9
Brand: Magnavox Pages: 50
Magnavox NB500MG1F - Blu-Ray Disc Player Specifications preview
NB500MG1F - Blu-Ray Disc Player
Brand: Magnavox Pages: 2
Magnavox AZ 8006 Owner'S Manual preview
AZ 8006
Brand: Magnavox Pages: 16
Magnavox MBP5320 Setup Manual preview
MBP5320
Brand: Magnavox Pages: 2
Magnavox MBP5230 Owner'S Manual preview
MBP5230
Brand: Magnavox Pages: 81
Magnavox MBP5130 Owner'S Manual preview
MBP5130
Brand: Magnavox Pages: 52
Magnavox MBP5120F Quick Start Manual preview
MBP5120F
Brand: Magnavox Pages: 2
Magnavox MBP5210 Specifications preview
MBP5210
Brand: Magnavox Pages: 2
Magnavox MBP1100 - Manual D'Utilisation preview
MBP1100 -
Brand: Magnavox Pages: 52
Magnavox \ Quick Start Manual preview
\
Brand: Magnavox Pages: 8
Magnavox AZ1307 - Portable Radio Cass Rec Bruksanvisning preview
AZ1307 - Portable Radio Cass Rec
Brand: Magnavox Pages: 18
Magnavox AZ1100 - Single Deck Manual De Instruções preview
AZ1100 - Single Deck
Brand: Magnavox Pages: 14
Magnat Audio MCD1050 Important Notes For Installation & Warranty Card preview
MCD1050
Brand: Magnat Audio Pages: 32
Magnavox AZ6843 - Portable Cd-player Manual Del Usuario preview
AZ6843 - Portable Cd-player
Brand: Magnavox Pages: 20
c.k Lektro LHP 600 Operating Instructions Manual preview
Lektro LHP 600
Brand: c.k Pages: 8

Brands by name

Popular brands

Load more brands