Pioneer LD-V4400 Level I Page 56 User Manual Download | Manualshive

Page: 56 / 138

background image

3.3.2 LaserBarcode 2 Standard Commands

Appendix D, LaserBarcode 2 Commands and Logos

, provides a list of commands

that comprise the LB2 Standard. Notice, the list is divided into “Original Commands”
and “Extended Commands”. LB2 includes all of the original LaserBarcode standard
commands and 15 new LB2 “extended commands”: 12 new independent commands,
one additional search command and two new segment play commands.

3.3.3 Creating LaserBarcodes

Bar’n’Coder 3.0,

Hypercard Barcode Printing Software for the Macintosh, can be

used to create LaserBarcode 2 extended commands and original LaserBarcode
commands.

Barkoder for Windows v2.0

is a software package used to create

LaserBarcodes on an IBM PC or compatible running DOS 3.0 and Windows 3.1 or
above.

LaserDisc Controller v3.1

is available for IBM PC and compatible machines

running DOS 3.0 or above, without Windows. All three barcode creation software
packages are available through Authorized Pioneer Dealers.

The LaserBarcode Association strongly recommends that all extended LB2 barcodes
include a subscript 2 next to the barcode. Barcode creation software sold by Pioneer
follows this recommendation: LB2 extended barcodes have a subscript 2 next to
them. These LB2 extended commands must be played on LB2 compatible players.
They will not play on LB-only compatible machines such as the discontinued LD-
V4200 with a LaserBarcode Adapter/15, the LD-V2000, or on the LD-V2200 player.
See

Appendix D, LaserBarcode 2 Commands and Logos,

for sample LB and LB2

barcodes. Notice the subscript 2 next to the LB2 barcodes.

3.3.4 The LaserBarcode Logos

Developers and publishers of barcode applications should pay particular attention
to the LaserBarcode and LaserBarcode 2 extended command sets and their
respective logos. When creating applications that are intended to work with all
LaserBarcode (LB) compatible players, developers and publishers must use only
the original LaserBarcode standard command set. When creating barcode
applications to work with LB2 compatible players, developers and publishers can
use original LB barcodes as well as LB2 extended commands.

NOTE:

LaserBarcode standard commands are a sub-set of the LaserBarcode 2

Standard. Applications using only original LaserBarcode standard commands will
play on all LB compatible players and on all LB2 compatible players. If, however, an
application uses LB2 extended commands (distinguished by the subscript 2 next to
the code), the LB2 extended commands will not play on LB-only compatible players.

LD-V4400 Level I & III • Chapter Three

LD-V4400 Level I & III User’s Manual

TP 116

v1.1 • 9/93

3-15

«
...
54
55
56
57
58
...
»

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Related manuals for LD-V4400 Level I

Brand: Quanmax Pages: 44

Brand: Lumin Pages: 11

Brand: Olin Pages: 14

Brand: Radio Shack Pages: 40

Brand: Akai Pages: 28

MXM 888 FM MARBLE

Brand: Gogen Pages: 116

Brand: Linden Pages: 28

Brand: Questyle Audio Pages: 19

MP3134BLU - Boombox - Translucent

Brand: Memorex Pages: 2

Brand: F&U Pages: 16

Brand: Odys Pages: 26

Peek-A-Babe CT-60

Brand: Lenoxx Pages: 2

Brand: Vitek Pages: 6

Brand: Schaub Lorenz Pages: 16

Brand: Sling Media Pages: 13

Brand: Arirang Pages: 15

Brand: Noblex Pages: 27

Brand: LG Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands