Pioneer LD-V4400 Level I, User Manual

Page: 20 / 138

2.1.2 Active States
LD-V4400 processing is performed within several distinct Active States. When a
command is executed, the Active State changes inside the player. If you consider
player processing as a series of events within the Active States listed below , it is
easier to understand the effects of various commands. The Player’s five main Active
States are:
• Door Open
• Park
• Spin-up
• Random Access
• Spin-down
The player is in Door Open before the disc is loaded into the drawer. After the door
is closed, the player enters Park. When a START or PLAY command is input while
the player is in Park, the disc starts rotating and the player enters Spin-up . When
the player is ready to play images, it enters Random Access. Random Access is
further divided into Play , Still , Scan , Pause , Multi-Speed , and Search.
Chapter Two • LD-V4400 Level I & III
2-2
TP 116 v1.1 • 9/93
LD-V4400 Level I & III User’s Manual
Normal Control Mode
using
P O W E R — O N
Front Panel Buttons
Remote Control
LaserBarcode Control
R S — 2 3 2 C
Function Switch Setting Mode
Press DISPLAY again, to commit
settings to memory and to exit Function
Switch Setting Mode
Test Mode
Select Test Mode on P - 2 of Function
Settings; or Turn ON (1) Bit 7 of Reg C.
Not required for normal player operation;
used primarily for servicing the player
REG. C
BIT 7=1
REG. C
BIT 7=0
+
Simultaneously Pressing the
DISPLAY Button
Operating Modes
Figure 2-A