manualshive.com logo in svg

Pioneer LD-V4400 Level I, User Manual

The Pioneer LD-V4400 Level I User Manual is a comprehensive guide that enables users to maximize their experience with this cutting-edge product. With easy-to-understand instructions and diagrams, this manual covers all aspects of operation and troubleshooting. Download it for free from manualshive.com to enhance your Pioneer LD-V4400 Level I experience.

Share
Download
background image

B.  LaserBarcode 2  Search Commands

The are three LaserBarcode 2 Search Commands:  Two original search commands and one
extended search command.

Original Search Commands

1.

Frame Search 

- 

(CAV)

Instructs the player to search to the specified frame and enter

Still Mode

.  This command can only be used with CAV discs.

This command was modified to include digital audio playback under LB2.

2.

Chapter Search

- 

(CAV, CLV)

Instructs the player to:

a)  search to the specified chapter and enter 

Still Mode

on CAV discs.

b)  search to the specified chapter and enter 

Pause Mode

on CLV discs. †  

This command was modified to include CLV chapter search and digital audio playback under LB2.

Extended Search Command (CLV discs)

3.

Time Search

- 

(CLV)

Instructs the player to search to the specified time number and

enter 

Pause Mode

.†  This command can only be used with CLV discs.

C.  LaserBarcode 2  Segment Play Commands

The are four LaserBarcode 2 Segment Play commands:  Two “original” LaserBarcode 
Segment Play commands and two “extended” LB2 Segment Play commands.

Original Segment Play Commands

1.

Frame Segment

- 

(CAV)

Instructs the player to search to the start frame number and

play to the end frame number.  When the motion segment is completed, the player enters

Still Mode

.  This command can only be used with CAV discs.

This command was modified to include digital audio playback under LB2.

2.

Chapter Segment

- 

(CAV, CLV)

Instructs the player to search to the start chapter number

and play to the end chapter number.  When the motion segment is completed, the player
will:
a) enter 

Still Mode

on the fist frame of the next chapter on CAV discs. 

b) enter 

Pause Mode

on the first frame of the next chapter on CLV discs.† 

This command was modified to include digital audio playback under LB2.

Extended Segment Play Commands

3.

Time  Segment

- 

(CLV)

Instructs the player to search to the start time number and play

to the end time number. When the motion segment is completed, the player enters 

Pause

Mode

.†  This command can only be used with CLV discs. 

4.

Special Effects Segment 

- 

(CAV)

Instructs the player to search to the start frame

number and play to the end frame number in the slow motion forward or reverse
directions.  This command can only be used with CAV discs. Specify speed and direction
as follows:

† On an LD-V8000 player this command will end in 

Still Mode

.

* The speeds described in the Special Effects Segment Play Commands above, are specific to Pioneer LB2 compatible industrial
videodisc players.  See  bottom of page I-4 for range of Slow Forward and Slow Reverse playback speeds of the LB2 Standard. 

LaserBarcode Standard Commands & LaserBarcode Logo

D-8

TP 116

v1.1 • 9/93

Appendix D LaserBarcode Standard Commands & Logo

Direction

Speed on Pioneer LD Players*

Forward or Reverse

Slow Motion 1 = 1/4 x normal 
Slow Motion 2 = 1/8 x normal 
Slow Motion 3 = 1 frame / second
Slow Motion 4 = 1 frame / 3 seconds

Summary of Contents for LD-V4400 Level I











































































































































Reviews:

No comments

Related manuals for LD-V4400 Level I

BARIX EXSTREAMER 100 Installation Instructions preview
EXSTREAMER 100
Brand: BARIX Pages: 2
Samsung DVD P191 - MULTI REGION CODE FREE DVD PLAYER. THIS PLAYER PLAYS... User Manual preview
DVD P191 - MULTI REGION CODE FREE DVD PLAYER. THIS PLAYER PLAYS...
Brand: Samsung Pages: 140
Panasonic DMP-BDT460 Operating Instructions Manual preview
DMP-BDT460
Brand: Panasonic Pages: 40
American DJ Audio DCD PRO 250 Instruction Manual preview
DCD PRO 250
Brand: American DJ Audio Pages: 18
T+A Elektroakustik CC 820 M Manual preview
CC 820 M
Brand: T+A Elektroakustik Pages: 48
Teac MP-280 Basic Operation preview
MP-280
Brand: Teac Pages: 16
Consonance Reference 8-20 Manual preview
Reference 8-20
Brand: Consonance Pages: 16
Denon DN-S3500 Service Manual preview
DN-S3500
Brand: Denon Pages: 60
Bang & Olufsen Beogram CD 5500 Service Manual preview
Beogram CD 5500
Brand: Bang & Olufsen Pages: 66
Citizen C201DVD User Manual preview
C201DVD
Brand: Citizen Pages: 30
Lenoxx CR-186 Operating Instructions Manual preview
CR-186
Brand: Lenoxx Pages: 10
Lenoxx CD-52 Operating Instructions Manual preview
CD-52
Brand: Lenoxx Pages: 14
Lenoxx CD-511 Operating Instructions Manual preview
CD-511
Brand: Lenoxx Pages: 24
Lenoxx Lenoxx Sound SL-6703 Operating Instructions Manual preview
Lenoxx Sound SL-6703
Brand: Lenoxx Pages: 24
Lenoxx CD-163 Operating Instructions Manual preview
CD-163
Brand: Lenoxx Pages: 26
Philips GoGear SA2312 Owner'S Manual preview
GoGear SA2312
Brand: Philips Pages: 22
JVC XM-PX50WT Service Manual preview
XM-PX50WT
Brand: JVC Pages: 40
Philips GoGear SA2620 Specifications preview
GoGear SA2620
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands