< CRD4849-A >
29
Chapter
68
En
Installing the microphone
Install the microphone in a place where
its direction and distance from the driver
make it easiest to pick up the driver’s
voice.
Be sure to turn off (ACC OFF) the product
before connecting the microphone.
■
Mounting on the sun visor
1 Fit the microphone lead into the
groove.
1
2
1
Microphone lead
2
Groove
2 Attach the microphone clip to the
sun visor.
1
2
1
Microphone clip
2
Clamps
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
Install the microphone on the sun visor
when it is in the up position. It cannot rec-
ognize the driver’s voice if the sun visor is in
the down position.
■
Installation on the steering
column
1 Detach the microphone base from
the microphone clip by sliding the
microphone base while pressing
the tab.
4
1
2
3
1
Microphone
2
Tab
3
Microphone base
4
Microphone clip
2 Mount the microphone on the
steering column.
Install the microphone on the steering
column, keeping it away from the steering
wheel.
1
2
1
Double-sided tape
2
Clamps
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
■
Adjusting the microphone angle
The microphone angle can be adjusted.
Summary of Contents for AVH-X8750BT
Page 167: ... CRD4849 A ...