Pioneer AVH-X8750BT, Owner'S Manual

Page: 6 / 252

< CRD4849-A >
01
Chapter
6
En
laws, this product is not for use with a
video image that is visible to the driver.
In some countries the viewing of video
image on a display inside a vehicle even
by persons other than the driver may be
illegal. Where such regulations apply,
they must be obeyed.
If you attempt to watch video image while
driving, the warning “ Viewing of front seat
video source while driving is strictly pro-
hibited. ” will appear on the screen. To watch
video image on this display, stop the vehicle
in a safe place and apply the parking brake.
Please keep the brake pedal pushed down
before releasing the parking brake.
When using a display con-
nected to V OUT
The video output terminal ( V OUT ) is for
connection of a display to enable passen-
gers in the rear seats to watch video images.
WARNING
NEVER install the rear display in a location
that enables the driver to watch video
images while driving.
To avoid battery exhaustion
Be sure to run the vehicle engine while using
this product. Using this product without
running the engine can drain the battery.
WARNING
Do not install this product in a vehicle that
does not have an ACC wire or circuitry
available.
Rear view camera
With an optional rear view camera, you are
able to use this product as an aid to keep
an eye on trailers, or backing into a tight
parking spot.
WARNING
SCREEN IMAGE MAY APPEAR
REVERSED.
USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
For safety reasons, the rear view camera
function is not available until this prod-
uct boots up completely.
The rear view mode is to use this product
as an aid to keep an eye on the trailers,
or while backing up. Do not use this
function for entertainment purposes.
Handling the SD card slot
CAUTION
Keep the SD memory card out of the
reach of small children to prevent them
from accidentally swallowing it.
To prevent data loss and damage to the
storage device, never remove it from this
product while data is being transferred.
If data loss or corruption occurs on
the storage device for any reason, it is
usually not possible to recover the data.
Pioneer accepts no liability for damages,
costs or expenses arising from data loss
or corruption.
Never insert or eject an SD memory card
while driving.
Handling the USB connector
CAUTION
To prevent data loss and damage to the
storage device, never remove it from this
product while data is being transferred.
Pioneer cannot guarantee compatibility
with all USB mass storage devices and
assumes no responsibility for any loss
of data on media players, iPhone, smart-
phone, or other devices while using this
product.
Visit our website
Visit us at the following site:
In Mexico
http://www.pioneer-mexico.com/
In Singapore
http://www.pioneer.com.sg/
In Malaysia
http://www.pioneer.my/
In Thailand
http://pioneer-thailand.co.th/
In Philippines
http://www.pioneer.ph/
In Vietnam
http://www.pioneer.vn/
In Indonesia
http://www.pioneer.co.id/
In Australia
http://www.pioneer.com.au/
In Israel
http://www.pioneerisrael.co.il/
In Middle East / Africa
http://www.pioneer-mea.com/en/
In Latin
http://www.pioneer-latin.com/en/
about-pioneer.html
In Hong Kong
http://www.pioneerhongkong.com.hk/
ct/index.php
In Taiwan
http://www.pioneer-twn.com.tw/
In Korea
http://www.pioneer.co.kr/
We offer the latest information about
PIONEER CORPORATION on our website.
Pioneer regularly provides software
updates to further improve it’s products.
Please check the support section of the
Pioneer website for all available software
updates.
Protecting the LCD panel and
screen
p
Do not expose the LCD screen to direct
sunlight when this product is not
used. This may result in LCD screen
malfunction due to the resulting high
temperatures.
p
When using a cellular phone, keep the
antenna of the cellular phone away from
the LCD screen to prevent disruption of
the video in the form of spots, colored
stripes, etc.
p
To protect the LCD screen from damage,
be sure to touch the touch panel keys
only with your finger and do so gently.
Notes on internal memory
■
Before removing the vehicle
battery
p
Some of the settings and recorded con-
tents will not be reset.
■
Data subject to erasure
The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
p
Some of the settings and recorded con-
tents will not be reset.
■
Resetting the microprocessor
CAUTION
Pressing the RESET button resets set-
tings and recorded contents to the factory
settings.
p
Do not perform this operation when a
device is connected to this product.
p
Some of the settings and recorded
contents will not be reset.
The microprocessor must be reset under the
following conditions:
Prior to using this product for the first
time after installation.
If this product fails to operate properly.
If there appears to be problems with the
operation of the system.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen
tip or other pointed implement.
Settings and recorded contents are reset to
the factory settings.
1
1
RESET button
About this manual
This manual uses diagrams of actual
screens to describe operations. However,
the screens on some units may not match
those shown in this manual depending on
the model used.