30
C h a p t e r 3
A d d i t i o n a l S e t u p E x a m p l e s
displayed. Tune your TV to channel 3 or 4, depending on how you set the channel 3/4
switch on your VCR.
To connect a video camera (not shown):
1. If you don’t have any device connected to the Recorder’s
Audio/Video Input 2
, skip
to the next step. If you normally have a VCR connected to the
Audio/Video Input 2
connector, you will have to disconnect it temporarily. Remove the Composite A/V
cable from the VCR’s
Audio/Video Output
. You can use this same cable to connect
your video camera, since it is already connected to the Recorder’s
Audio/Video
Input 2
.
2. Connect a Composite A/V cable from the
Audio/Video Output
connector on the video
camera to the
Audio/Video Input 2
connector on the Recorder. This will allow you to
transfer recordings from a video camera to the Recorder (so you can turn your home
videos into DVDs). See Chapter 3, “Playing and Recording Programs” in the
User’s
Guide
for details.
Summary of Contents for 2
