Pioneer 2, Installation Manual

Page: 33 / 65

28
C h a p t e r 3 A d d i t i o n a l S e t u p E x a m p l e s
7. Connect the IR Control cable. (Skip this step if you completed step 8 above.)
(a)
Plug the purple end of the IR Control cable into the
Channel Change/IR
connector
(the upper mini-jack) on the Recorder.
(b)
Locate the IR sensor (see page 9).
(c)
Mount
the IR emitters. Place one emitter on top of the cable box and the other on top of the
satellite box. Be sure both emitters stick out about 1.5 inches directly in front of the IR
sensor. (Use the provided adhesive strips to hold the emitters in place.)
8. Plug in all power cords, and turn on your TV and your A/V receiver. Select the input
for the Recorder. If you do not currently see the Welcome screen, you’ll need to select
the input for your Recorder on your A/V receiver. (See the manual that came with your
A/V receiver for instructions on how to choose an input. Some A/V receivers have one
Input button that cycles through the inputs. Others have multiple input buttons, one for
each input.) If you still don’t see the Welcome screen, press the TV/Video, Source, or
Input button on your TV until you see the Welcome screen. For more help, see page
42.
9. Once you see the Welcome screen, the last step is to complete Guided Setup (see the
User’s Guide for details). You must complete Guided Setup before you can play and
record DVDs
extends 1½ "
Cable Box or
Satellite Receiver
a
Recorder
®
b
c
For tips on the IR Control cable
connection and for alternatives to
the Serial Control cable, see page 9.
®
IR Control cable connection
7