Pilz PSEN op2B-2-050/1, Operating Manual

Page: 4 / 65

Content
Operating Manual PSEN op2B/1 Series
1003357-EN-02
4
6.4 Wiring 37
6.4.1 General guidelines 37
6.4.2 Connector pin assignment 37
6.4.3 TEST/START button 39
6.4.4 EDM 39
6.4.5 Earthing the safety light grid 40
6.4.6 Connections for muting 40
6.4.7 Wiring of external sensors on the safety light grid 41
Section 7 Commissioning 42
7.1 Setting the functions 42
7.1.1 Open DIP switch cover 42
7.1.2 Activate muting 42
7.1.3 Set muting timeout 43
7.1.4 Activate EDM 43
7.1.5 Restart after unit is triggered 43
7.2 Orientation 44
7.2.1 General guidelines 44
7.2.2 Safety light grid alignment 45
7.2.3 Muting sensor alignment 46
7.2.4 LED support during alignment 47
7.3 Checking the safety light grid 47
7.4 System connection 48
Section 8 Operation 49
8.1 Status information during operation 49
8.2 Perform test 50
8.3 Diagnostics and troubleshooting 50
8.3.1 Indicators for fault diagnostics 50
8.3.2 Perform reset 52
Section 9 Regular checks and maintenance 53
9.1 Checks 53
9.1.1 Regular checks 53
9.1.2 Daily check 53
9.1.3 Check after plant/machine modification 53
9.2 Maintenance 53
Section 10 Dimensions 55
Section 11 Technical details 56
11.1 Safety characteristic data 58
Section 12 Order reference 59
12.1 Order reference for safety light grids 59
12.2 Order reference for accessories 59