98
automatically disabled.
-221 Settings conflict; trigger output connector used by burst
gate
If you have enabled burst , and selected gated burst mode, the
Trig
Out
signal is automatically disabled.
-221 Settings conflict; trigger output connector used by FSK
If you have enabled FSK and is using the external trigger source, the
Trig Out
signal is automatically disabled.
-221 Settings conflict; trigger output connector used by trigger
external
When using the external trigger source, the
Trig Out
signal is
automatically disabled.
-221 Settings conflict; frequency reduced for user function
The maximum output frequency for arbitrary waveform is 10 MHz.
When you change function from one allowing higher frequency to
arbitrary waveform, the frequency is adjusted to 10 MHz.
-221 Settings conflict; frequency changed for pulse function
The maximum output frequency for pulse waveform is 10 MHz. When
you change function from one allowing higher frequency to pulse
waveform, the frequency is adjusted to 10 MHz.
-221 Settings conflict; frequency reduced for ramp function
The maximum output frequency for ramp waveform is 200 kHz.
When you change function from one allowing higher frequency to
ramp waveform, the frequency is adjusted to 200 kHz.
-221 Settings conflict; frequency made compatible with burst
mode
The maximum output frequency for an internal-triggered burst is
2.001 mHz. The waveform generator has adjusted the frequency to
be compatible with the current setting.
-221 Settings conflict; burst turned off by selection of other
Summary of Contents for G5100A
Page 5: ...5 D APPLICATION PROGRAMS 173 ...
Page 71: ...71 Schematic of Receiver ...
