111
7.8 Arbitrary Waveform Errors
770 Nonvolatile arb waveform memory corruption detected
A checksum error was found in the non-volatile memory used to store
arbitrary waveform. As a result, the arbitrary waveform cannot be
retrieved.
781 Not enough memory to store new arb waveform; use
DATA:DELETE
All non-volatile memory locations are occupied. There is no room to
store a new waveform.
781 Not enough memory to store new arb waveform; bad sectors
Due to storage hardware failure, new waveforms cannot be saved.
782 Cannot overwrite a built-in waveform
The five built-in waveform names (“EXP_RISE”, “EXP_FALL”,
“NEG_RAMP”, “SINC”, and “CARDIAC”) are reserved and cannot be
used with DATA:COPY command.
784 Name of source arb waveform for copy must be VOLATILE
When using the DATA:COPY command, the data source must be the
VOLATILE one.
785 Specified arb waveform does not exist
Before using DATA:COPY command to copy from the volatile memory,
be sure to download the waveform to it using the DATA VOLATILE or
DATA:DAC VOLATILE command.
786 Not able to delete a built-in arb waveform
Deleting the built-in waveform is not allowed.
787 Not able to delete the currently selected active arb
waveform
Deleting the waveform that is currently outputting is not allowed.
Summary of Contents for G5100A
Page 5: ...5 D APPLICATION PROGRAMS 173 ...
Page 71: ...71 Schematic of Receiver ...
