136
cannot delete an arbitrary waveform that is currently output, or an error will be
generated.
DATA:ATTRibute:AVERage? [<arb name>]
Query the arithmetic average of all data points for the specified waveform
(-1
≤≤
). The default waveform is the currently active one (FUNC:USER
command). If you query a waveform which is not stored in memory, an error
“Specified arb waveform does not exist” will be generated.
DATA:ATTRibute:CFACtor? [<arb name>]
Query the crest factor of all data points for the specified waveform. The crest
factor represents the ratio of the peak value to the RMS value of the waveform.
The default waveform is the currently active one (FUNC:USER command). If you
query a waveform which is not stored in memory, an error “Specified arb
waveform does not exist” will be generated.
DATA:ATTRibute:POINts? [<arb name>]
Query the number of data points for the specified waveform. A value from 1 to
262,144 will be returned. The default waveform is the currently active one
(FUNC:USER command). If you query a waveform which is not stored in
memory, an error “Specified arb waveform does not exist” will be generated.
DATA:ATTRibute:PTPeak? [<arb name>]
Query the peak-to-peak value of all data points for the specified waveform. The
default waveform is the currently active one (FUNC:USER command). A value
from “0” to “+1.0” will be returned. “+1.0” indicates a full amplitude. The
maximum amplitude will be limited if the data points do not span the full range
of the output DAC (Digital-to-Analog converter). For example, the built-in sine
wave does not use the full range of binary values between
±
1 and therefore its
maximum amplitude is 6.087 Vpp (into 50 ohms). If you query a waveform
which is not stored in memory, an error “Specified arb waveform does not exist”
will be generated.
DISPlay {OFF|ON}
Turn off or on the display. Disabling the front-panel display may speed up the
command execution for remote interface operation. Remote interface error
messages will be shown even when the display is off. Displaying a message on
Summary of Contents for G5100A
Page 5: ...5 D APPLICATION PROGRAMS 173 ...
Page 71: ...71 Schematic of Receiver ...
