150
Erase the instrument state from the specified storage location, including the
custom name specified to that location, if any, and restore the default name.
You cannot recall the instrument state from a storage location that is empty or
an error will be generated.
MEMory:STATe:RECall:AUTO {OFF
︱
ON}
This instrument doesn't support
automatic recall of the power-down state.
So it always returns “0” (OFF).
MEMory:STATe:RECall:AUTO?
This instrument doesn't support
automatic recall of the power-down state.
So it always returns “0” (OFF).
MEMory:STATe:RECall:SELect {0
︱
1
︱
2
︱
3
︱
4}
Select power-on state from stored state when power is turned on. The
default is “0” (default state).
MEMory:STATe:RECall: SELect?
Query the power-on state when power is turned on. The value 0 ~ 4 will
be returned. 0: default state, 1: state 1, 2: state 2, 3: state 3, 4: state 4
MEMory:STATe:VALid? {1
︱
2
︱
3
︱
4}
Query the specified storage location to determine if it currently stores a valid
instrument state. “0” is returned when there is no valid state stored in that
location and “1” is returned when there is a valid state stored in that location.
MEMory:NSTates?
Query the number of storage locations available for storing the states. “4” is
returned.
-- O --
*OPC
Set the “Operation complete” bit (bit 0) in the Standard Event Register after all
of the previous commands have been completed. Other commands may be
executed before the bit is set. This command is used in the triggered sweep or
Summary of Contents for G5100A
Page 5: ...5 D APPLICATION PROGRAMS 173 ...
Page 71: ...71 Schematic of Receiver ...
