132
(ON).
CALibration:SETup <0
︱
1
︱
2
︱
3
︱
…
︱
94>
Configure the waveform generator’s internal state for each of the calibration
step to be performed.
CALibration:SETup?
Query the calibration setup number. Return a value from “0” to “94”.
CALibration:STRing<
quoted string
>
Record information about calibration. For instance, the name of the person who
did the calibration, the date of the last calibration, or the date of next scheduled
calibration. This information is stored in non-volatile memory and newly
recorded message will overwrite the previous one.
CALibration:STRing?
Query the information about the calibration. Return a quoted string.
CALibration:VALue<
value
>
Specify the value of the known calibration signal used by the calibration
procedure.
CALibration:VALue?
Query the present calibration value. Return a number in the form of
“+1.000000001”.
-- D --
DATA VOLATILE, <value>, <value>, …
Download floating-point values from -1 to +1 into volatile memory. You can
download from 1 to 262,144 points per waveform. The waveform generator
takes the specified number of points and expands them to fill waveform memory.
If the specified number is less than 16,384, the waveform generator
automatically generates a waveform with 16,384 points. If the specified number
is more than 16,384, a waveform with 65,536 points will be generated. And if
the specified number is more than 65,536, a waveform with 262,144 will be
generated.
Summary of Contents for G5100A
Page 5: ...5 D APPLICATION PROGRAMS 173 ...
Page 71: ...71 Schematic of Receiver ...
