Picotest G5100A, Manual

Page: 128 / 180

128
setting, depending on which has been selected to “hold” (FUNC:PULS:HOLD
command). However the waveform generator will adjust the pulse width or the
edge time to comply with the frequency restrictions for pulse waveforms.
APPLY:
NOISe [<frequency
︱
DEF> [,<amplitude > [,<offset>] ]]
Output Gaussian pulse wave with the specific frequency, amplitude and (dc)
offset. The waveform is outputted as soon as the command is executed. The
specified frequency has no effect on the noise
wave, but is remembered by the
waveform generator and will be used on the next function you choose.
APPLY:
DC [<frequency>
︱
DEF [,<amplitude
︱
DEF> [,<offset>] ]]
Output a dc voltage with the specified offset level. You can set the dc voltage to
any value between
±
5Vdc into 50 ohms or
±
10Vdc into an open circuit. The
waveform is output as soon as the command is executed. The specified
frequency and amplitude have no effect on the pulse wave, but are remembered
by the waveform generator and will be used on the next function you choose.
APPLY:
USER [<frequency> [,<amplitude > [,<offset>] ]]
Output an arbitrary waveform currently chosen by the FUNC:USER command
with the specific frequency, amplitude and offset. The waveform is output as
soon as the command is executed.
APPLy?
Query the current configuration and return a quoted string. The quoted string
includes the function, frequency, amplitude and offset as in the following
format:
“ function frequency amplitude offset ”
This command allows you to append this query response to an APPL: command
in your programming application and use the result to place the waveform
generator in the specified state.
-- B --
BURSt:MODE {TRIGgered|GATed}