phytron 10010115, Manual

Page: 21 / 56

phytron
5 Power Supply
The following chapters give information about the power supply of the CLD
+
with DC and
about current set up. The supply voltage has to be connected to the X1 connector
„Supply“.
5.1 Connector „Supply“
Permissible power supply range: 20 to 50 V
DC
Rated voltage: 24 V
DC
Warning:
Don´t ground the supply voltage!
Fig. 7: Connecting the power supply voltage
We recommend fixing the supply cable with the strain relief clamps.
5.2 Accessories: PS 10-24 Power Supply Unit
The power supply unit PS 10-24 provide 10 A / 24 V
DC
for the supply of the CLD
+
.
Depended on the load, the power supply unit is able to provide several devices.
PS 10-24 are connected straight to the power supply voltage 230 or 115 V
AC
.
The power input is protected internally, the output is save against continuous short circuit.
Save working is possible because of protective over temperature and over voltage and
power failure bridging.
The power supply unit can be mounted by rail mounting in the switching cabinets.
See PS 10-24 manual.
19 MA 2112-A002 GB