phytron 10010115, Manual

Page: 7 / 56

phytron
Motor currents from 0.14 to 2 A
Peak
Run, stop and boost currents can be individually programmed.
Supply voltage DC
A DC voltage with 20 to 50 V
DC
can be connected to the supply voltage connector.
Rated voltage: 24 V
DC
. A load capacitor is already included.
Inputs
Controlling via RS 422 push-pull driver ensures high immunity against disturbances.
Open-Collector controlling (OC) is also possible.
Plain text display 2 x 8 characters
Fig. 2: Plain text display with menu control buttons
•
Menu-driven set-up of current values, step resolution and other parameters
•
Display of actual parameters, test mode
•
Display of currents, voltage and temperature
•
Diagnostics: Low voltage or over temperature monitors.
ServiceBus
The ServiceBus offers the following possibilities:
•
Power stage parameter programming:
run, stop and boost currents, step resolution, preferential direction,
current delay time,...
•
Software configuration by USB connection,
opto-decoupled from the motor supply
•
Parameter memory for permanent storage of user-defined adjustments in the EPROM
of the power stage.
The software ServiceBus-Comm
®
is able to program the power stage quickly and easily
(See manual ServiceBus-Comm
®
).
5 MA 2112-A002 GB