Manual CLD
+
9.2 USB Driver Installation
•
When the CLD
+
is connected to the PC by USB-interface, USB drivers,
stored on the phytron CD, have to be installed on the PC.
•
Administrator
authorizations are required for the driver installation.
•
Use a USB cable with a maximum length of 2 m!
•
If you want to test several USB devices, which are identical in construction,
you should use the same USB port on the PC. Thus, you avoid to change
the COM port number.
USB Driver Installation (Windows)
•
Insert
the
phytron
CD and open the folder
USB Driver
by the Windows Explorer.
Select the .
exe
-program which goes with your system software and start it by double
click. The following window is shown on desktop after a successful installation:
•
Connect the CLD
+
directly or via USB converter to the USB port of your PC by
USB cable.
•
For checking the correct USB driver installation, continue as follows:
Start the device manager by clicking
Start
Æ
Settings
Æ
System control
and double-
click on
System
. Then select the
Device manager
tab. The USB components can be
found in
Computer
Æ
Ports
and in
Universal Serial Bus Controller
. Here the new
USB-component is shown:
USB Serial Port (Com X)
•
You’ll find information about the driver installation for the chip FT232R and more
drivers for Linux and MAC on http://www.ftdichip.com.
MA 2112-A002 GB
40
Summary of Contents for 10010115
