phytron 10010115, Manual

Page: 9 / 56

phytron
7 MA 2112-A002 GB
1.3 Operating Modes
The CLD
+
can be used in 3 operating modes:
1.3.1 Operating Mode ‚Menu-Driven‘
All operation parameters are menu-driven with the input keys in the Setup menu. In the
process the function
S-BUS=DISABLED is defined.
1.3.2 Operating Mode ‚ServiceBus‘
The S-BUS=ENABLED in the Setup menu activates the ServiceBus mode and all settings
are made by ServiceBus. The parameter values are shown in the CLD
+
display during the
operation. It is not possible to change parameters with the input keys, acknowledged by
!S-BUS ENABLED (see chap. 9).
1.3.3 Operating Mode ‚Bus Mode Exclusive‘
The ‚bus mode exclusive‘ ensures safe operation in ServiceBus mode. If the power stage
is set to ‚Bus mode exclusive’ in the ServiceBus mode by ServiceBus-Comm (instruction
code ‚PX’), all settings with the menu buttons are ignored.
Leaving the mode is only possible via ServiceBus by the ‚PX‘ instruction code.