Phytec kitCON-161CS, Hardware Manual

Page: 57 / 62

Flash Tools

PHYTEC Meßtechnik GmbH 1999 L-356e_2
51
Once FLASHT.EXE has been successfully invoked, loading of the
FlashTools starts and the green LED D5 shines. The downloading can
be viewed on the Host-PC monitor screen. FlashTools start im-
mediately following loading and the main menu appears on the
screen. You can leave the FlashTools at any time except during a
download by pressing ’F1’.
12.2 Downloading into Flash
The main menu gives access to the different functions of the
FlashTools (refer to
Figure 5). The tools enable the partial or total erasure of the Flash
device, as well as programming of the device. They also allow device
status information to be read from the Flash. All menu options are
intuitive. Only Intel-hexfiles can be used for programming purposes.
After user code has been downloaded into the Flash, it can be exe-
cuted following a software reset. Alternatively, turn Switch 1 of Dip-
Switch S3 to OFF in order to switch the kitCON-161CS/JC/JI into
execution mode following a hardware reset.
FLASHT.EXE can always be exited, except during downloading of
user code, with the special-function key ’F1’.