Phytec kitCON-161CS, Hardware Manual

Page: 29 / 62

Jumper

PHYTEC Meßtechnik GmbH 1999 L-356e_2
23
4 Jumper
To configure the module, the kitCON-161CS/JC/JI has 13 insertable
and 9 solderable jumpers. In order to ensure immediate use of the
board the jumpers have been configured prior to delivery. Figure 14
illustrates the numbering of the jumper, while Figure 15 indicates the
location of the jumpers on the board.
Figure 14: Numbering of the Jumper-Pads
Figure 15: Position of the Jumpers (component side) and default-setting
(standard version of the kitCON-161CS/JC/JI)
1
1
: In order to utilize the special features of a specific controller on the kitCON-161CS/JC/JI
other jumpers might be set additionally
1
2
3
1
2
1 3
4 2
1
3 4
2 1 2
3 4
6
5
eg.: JP3, JP4, ..
eg.: JP2
eg.: JP7, JP13 eg.: JP11, JP12 eg.: JP1, JP5
*
* = J8 – J10 and J13 – J15 are on the back side of the kitCON-161CS/JC/JI