Phytec kitCON-161CS, Hardware Manual

Page: 22 / 62

kitCON-161CS/JC/JI
16

PHYTEC Meßtechnik GmbH 1999 L-356e_2
3.3 The ICE/connect-16x
The ICE/connect-16x provides an easy possibility for connecting a
standard emulator, which uses the controller on-board, to the kitCON-
161CS/JC/JI. It can be mounted at position X2 (refer to Figure 6). It
carries all data- and address signals. The control signals coming from
the controller are extended via pre-connections (J8-J10 and J13-J15)
at the ICE/connect-16x to the peripheral devices. When using an
emulator the emulator generates the control signals. In this case the
pre-connections must be opened.
Table 3 shows the pinout of the ICE/connect-16x.
Note:
Pins 41+42, 43+44, 45+46, 47+48, 49+50 and 53+54 are pre-con-
nected on the component side. When using an ICE/connect-16x
these pre-connections must to be opened at jumpers J8, J9, J10,
J13, J14 and J15.