Phytec kitCON-161CS, Hardware Manual

Page: 14 / 62

kitCON-161CS/JC/JI
8

PHYTEC Meßtechnik GmbH 1999 L-356e_2
•
Enter ’load Pathname\hello161’ now in order to load the demo pro-
gram.
•
Once downloading has finished and the ’#’ prompt reappears, enter
the command ’g’ to execute the demo program. Successful execu-
tion results in the message ’Hello World !...’ appearing on the
screen of the Host-PC.
•
To leave the Monitor program press <F1>
Quickstart Instructions for using a Monitor program - Summary
•
Connect the kitCON-161CS/JC/JI to an IBM-PC or a compatible
system using a serial cable (P1 to COM1 or COM2)
•
Turn switch 1 of Dip-Switch S3 ON
•
Verify that jumper JP13 is closed in position 1+2 and 3+4
•
Attach an unregulated power supply with 8 V= to 12 V=/500 mA
to X5 on the kitCON-161. Double check the correct polarity.
•
Press switch <S1> to perform a RESET
•
Start MON166.EXE on your Host- PC (mon166 [2 (for COM2)])
from the DOS environment
•
After the ’#’ prompt appears, enter ’load Pathname\hello161’’
•
Press <ENTER>
•
After the ’#’ prompt reappears enter ’g’
•
Press <ENTER>
’’Hello World !..." appears on the screen of your Host-PC.
•
To leave the Monitor program press <F1>