Photron FASTCAM ultima APX-i2, Hardware Manual

Page: 52 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-50-
4.1.2. Saving Calibrated Setting
The APX-i2 can save one pattern of black image data obtained through the execution of
calibration. Follow the below procedure to save a correction pattern.
1. Press the MENU button on the keypad to display the menu.
2. Use the joystick to go to [CALIBRATE] and press the joystick down to select.
3. Use again the joystick to go to [SAVE] and press the joystick down to execute
[SELECT].
CA LIBRATE
OFF
ON
SAV E
L OAD
R ESERVE D
L U T SEL EC T
CA LIBRATE
D S SHU TTER
D IGITA L I/ F SE T
TIME SET
DA TE/ TIM E
Note: It may take tens of seconds to several minutes to save data of a black image.
4.1.3. Loading Calibrated Settings
The black image data saved in the APX-i2 system may be loaded for subsequent use in
the following manner.
1. Press the MENU button on the keypad to display the menu.
2. Use the joystick to go to [CALIBRATE] and press the joystick down to select.
3. Use the joystick to go to [LOAD] and press the joystick down to execute [LOAD].
4. The recorded black image data for calibration is read out from the processor
memory and the calibration is reflected on the output image.
CA LIBRATE
OFF
ON
SAV E
L OAD
C OL OR TE MP
L U T SEL EC T
CA LIBRATE
D S SHU TTER
D IGITA L I/ F SE T
M CD L/IR IG
AU TO PLA Y
TIME SET
DA TE/ TIM E