Photron FASTCAM ultima APX-i2, Hardware Manual

Page: 43 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-41-
3.1.3. Storing settings
Settings of the intensifier can be stored in the camera memory.
<How to store>
①
After completion of the intensifier setting, while the intensifier is still powered on, press the
MENU button on the keypad to exit the menu.
②
Press the STORE button on the keypad, and the settings have been stored in the camera.
<How to use the stored settings>
①
Press the MENU button on the keypad and select <II POWER>. The ON/ON/ON-LOAD
menu is displayed.
②
Select <ON LOAD> by the cursor and press the <Enter> button on the keypad. Power to the
intensifier is switched on by the stored setting. Note that the <GATE MODE> setting is still off,
as is the case with power-on by the POWER switch.
③
Select a gate mode. Press the MENU button and select <II GATE MODE> and press the
<Enter> button on the keypad. OFF / CONTINUOUS / GATING / EXTERNAL / DELAY are
displayed. Select one of them and press the <Enter> button to confirm the selection.
Note: The setting data that is stored in the camera includes the camera data such as the frame
rate and shutter speed. To store the II setup data, make settings of the camera correlated
with those of the intensifier.