Photron FASTCAM ultima APX-i2, Hardware Manual

Page: 130 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-128-
Min. Gate Width 20 ns
Control Keypad attached to camera; Software control
Gate Modes
Camera shutter sync mode; Random gate setting mode;
External input signal delay mode (TTL Positive)
Gate Setting
Restrictions
Min. 20ns up to max. 1/fps can be set at 20ns increment.
Repetitive gating up to 150 kHz can be set.
Gate setting while monitoring waveform is possible.
Protection against
Excessive Light
Excessive light protection circuit works under provided
software (system must be connected to a PC).
7.1.3. Miscellaneous
Operating Conditions
Ambient
Temperature
0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)
Mechanical Data
Camera Head 120(H) x 110(W) x 99(D) mm; 4.7(H) x 4.3(W) x 3.9(D) inches
Processor 213(H) x 140(W) x 307(D) mm; 8.4(H) x 5.5(W) x 12.1(D)
inches
AC Power Supply
Unit
66(H) x 140(W) x 277(D) mm; 2.6(H) x 5.5(W) x 10.9(D) inches
Remote Keypad 38(H) x 82(W) x 139(D) mm; 1.5(H) x 3.2(W) x 5.5(D) inches
Camera Cable 5 meters long
Power
Voltage 100/220 VAC
Frequency 50-60 Hz
Power Consumption Approx. 130 VA
Weight
Camera Head 1.0 kg; approx. 2.2 lbs.
Processor 5.5 kg; approx. 12.2 lbs.
AC Power Supply
Unit
3.0 kg; approx. 6.7 lbs.
Remote Keypad 0.9 kg; approx. 1.9 lbs.