Photron FASTCAM ultima APX-i2, Hardware Manual

Page: 137 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-135-
Camera Information Response Commands
The APX-i2 camera system returns the camera information to the requiring command.
The returned information includes a camera information command indicating the kind of
camera information followed by setup response command that shows the setup details.
The setup response command has numeric meaning in it and has 8 bytes or 16 bytes
(when the data bit portion only is converted) of information sent back in a row.
Note: A 16-byte transfer of data is available only when returning setup details on
resolution information.
Example: Request frame rate information when the camera is set 2,000 FPS.
1. Send a camera information request command [0xA0].
2. An information response command [0xd0] is returned by the camera.
3. Then, a setup response command consisting of 8 bytes of is returned in
a row like [0x30], [0x30], [0x30], [0x30], [0x30], [0x30], [0x30], [0x30] is
returned.
Camera Information Commands
Setup Response Commands (8 or
16bytes)
FRAME RATE 0xD0 00000060
～
00120000
RESOLUTION 0xD1 00000128 00000016
～
00001024 00001024
SHUTTER 0xD2 00000060
～
00250000
TRIGGER 0xD3 00000000 ： START
00000001
：
CENTER
00000002
：
END
00000003 ： MANUAL
00000004
：
RANDOM
00000005
：
RANDOM RESET
00000006 ： RANDOM CENTER
00000007
：
RANDOM MANUAL
00000008 ： TWO STAGES
LIVE/MEMO 0xD4 00000000 ： LIVE
00000001
：
MEMO