Photron FASTCAM ultima APX-i2, Hardware Manual

Page: 29 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-27-
ＰＯＷＥＲ
2.4. Switching Power on
When system connection is done, the system is ready to switch power on. Before
turning power on, be careful about the following points.
(1) Set the lens iris to the highest number (F/32 or F/16) and cover the lens with a lens
cap.
(2) Keep the POWER switch on the rear panel of the camera in the OFF position.
(3) Switch the video monitor on.
(4) Switch the processor on (press the “I” part on the switch).
Processor power SW
I
：
Power on
O
：
Power off
(5) The video monitor displays “LOADING” as shown below:
(6) When counting is done, the display changes as follows:
(7) Now you are ready to begin setting up the camera using the remote keypad.
LOADING
．． ． ． ．
123
500FPS 512
×
512 1/500s
1D01/01 LIVE 18:05:02
START
8192FR/16.384s