Photron FASTCAM ultima APX-i2, Hardware Manual

Page: 113 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-111-
5.7. Displaying Crosshair Cursor
The APX-i2 has a crosshair cursor display function. This function is useful to pinpoint
certain points of interest within the image displayed on the video screen at recording
and playback. The following shows how to use the crosshair function.
1. Press the MENU button on the keypad to display the menu list.
2. Move the joystick to select the [CURSOR] menu.
3. Now the CURSOR menu is displayed on the screen as shown below.
RANDOM FRAME
MANUAL TRIGGER
RANDOM M TRIGGER
RANDOM E TIMES
TWO STAGES
PARTITION
OSD SELECT
CURSOR CURSOR
ON1
ON2
OFF
ID01/01 LIVE 13:07:41
START
2048FR/1.024s
4. Two types of cursor lines are available – White (ON 1) and Black (ON 2) to choose
from depending on the brightness of the image.
5. Move the joystick up or down to select ON 1, ON 2 or OFF. Press the joystick down
to set the selection.
6. Press the MENU button to exit the menu.
7. If you have selected ON 1 or ON 2 in step 5 above, you will see a crosshair
displayed in the video screen and the corresponding coordinates of the cross are
shown in the lower right corner of the screen.
8. Move the joystick up or down and left or right to steer the crosshair over the
screen.
9. When you are done and you no longer need the crosshair cursor, repeat steps 1
to 6 selecting OFF in step 5 to make the cursor disappear.
ID01/01 LIVE 13:07:41
START
2048FR/1.024s
<320.241>
2000FPS 1024X1024 1/2000s