Phonak Audeo B Series, Training Manual

Page: 95 / 137

Phonak VA DALC Training Guide 93
Accepting incoming calls
To accept an incoming call, press the Accept button when you
hear the ringtone in your hearing aids. Speak into Roger Pen — not
your phone — when the call is in progress.
Only one phone call at a time is possible. If another incoming call
occurs on a second connected phone, you have two options:
S
Press Accept : The current call will be put on hold and the
new incoming call will be accepted.
S
Press Decline : The new incoming call will be
rejected and you can continue with your current call.
Rejecting a call
If you prefer not to answer an incoming call, press the
Decline
button. Using your phone to reject the call will
have the same effect.
Making phone calls
Make sure Roger Pen and your phone are connected
via Bluetooth as described in ‘Setting up Bluetooth’.
Use your phone’s keypad to enter the number and press the
phone’s call button. You will hear the ringing tone in your hearing
aids shortly afterwards.
Ending a call
To end a phone call via your Roger Pen, press its Decline
button. The call will terminate. You can also end a call via your
phone instead of your Roger Pen.
Mute
Firmly press the on / off button
to mute Roger Pen’s microphone
or audio input.
When muted, the indicator
light will turn solid violet.
Press the on / off button again to re-activate Roger Pen’s
microphones or audio input.
I ndicator light (multiple microphone status)
When using multiple Roger microphones, the following feed-
back may be given by the indicator light:
Indicator light
Meaning
Your Roger microphone is muted. Unmute it by
pressing the on / off button.
Your Roger microphone cannot detect the pri-
mary Roger microphone. Switch on the primary
Roger microphone and make sure it is within
range of your Roger microphone.