Phonak Audeo B Series, Training Manual

Page: 4 / 137

2 Phonak VA DALC Training Guide
Target 5.1 or higher
Fitting Software
iCube II , NOAHLink, Hi Pro, HI Pro 2, Programming Cables
Interfaces
Phonak CROS w/ iCube
Phonak Virto V Nano, Phonak Virto Q Nano, Phonak Ambra Nano:
• Programming cables, CPC/custom programming codes found in the miscellaneous section, page 3 of ROES digital
hearing aid
Audéo Q 10 RIC, Programming cables
Interface Exceptions
If you need to program hearing instruments outside of the
client’s ears (e.g. to prepare the hearing instruments before a
fitting session), place the hearing instruments on a flat surface
and put the neckloop of iCube
II around them as shown in
the picture.
Programming Hearing Instruments on your Desk
This training guide only includes materials for active contract products. For prior
contract products, information is available on Phonak Pro (www.phonakpro.com)
under the resource tab. Select literature and then search by product.