Phonak Audeo B Series, Training Manual

Page: 65 / 137

Phonak VA DALC Training Guide 63
AUDIO
power audio
Before streaming, wear your hearing aids and ComPilot II
correctly and switch them on.
Streaming audio via a cable
• Insert the audio cable into ComPilot II .
• Insert the other end of the audio
cable into the headphone socket on your
audio player and start the player.
The audio streaming will automatically start.
Adjust the volume on your audio player.
Press the main button to
stop and restart streaming.
• After successful pairing, the audio indicator will stop
rapidly blinking.
• Press play on the Bluetooth device if needed.
• Streaming will start automatically and the audio indicator
will turn solid blue indicating a successful connection.
To adjust the volume of the audio signal use the volume control
on the audio device.
To stop Bluetooth streaming completely, press and hold the
main button (2 sec), and switch the other Bluetooth device off
or disable it‘s Bluetooth feature.
Streaming audio via Bluetooth
Streaming audio via a cell phone
You can stream music wirelessly from your cell phone:
• Make sure ComPilot II is connected to your phone.
• Use your phone music player to play music.
Streaming audio via other devices
To use ComPilot
II
with a Bluetooth enabled audio device
(e.g. MP3 player), you must first pair the devices:
• Switch on ComPilot
II
.
• Press and hold the connect and volume up buttons
simultaneously (2 sec) until the audio indicator starts to
rapidly blink blue.
• Start the pairing process on the Bluetooth device within
1 minute according to the device’s user guide and use code
“0000” if prompted.
"click"
Streaming Audio
Using ComPilot
II
as a Remote Control
Before this functionality can be used, your hearing care
professional must enable the remote control in ComPilot
II .
Changing the volume
Press buttons on ComPilot II :
• to increase the volume
• to decrease the volume
Reducing surrounding sounds
You can reduce the surrounding sounds with a single button
press. This may be helpful during music or phone streaming.
The level of reduction is set by your hearing care professional.
• Press and hold the volume down button (>2 sec) for
more reduction.
• Press and hold the volume up button (>2 sec) to return to
the original hearing aid volume.
Changing the program
Changing hearing aid programs is only possible if no streaming
is in progress.
Press the main button to change
hearing aid programs.
Press the home button to return to the startup
program and volume level of your hearing aids.
If ComPilot II is used as a handheld remote control
(without neckloop):
• Max. distance to the hearing aids is 110 cm / 43 in.
• Hold ComPilot II as shown.
More remote control information
• Press and hold the home button (>2 sec) to
select the favorite hearing program configured by your
hearing care professional.
• Both hearing aids are controlled at the same time.
Please refer to the device’s user guide for more detailed
steps on the pairing procedure.
ComPilot II streaming time is up to 24 hours with a fully
charged battery.