![background image](http://html.mh-extra.com/html/phoenix/lt4/lt4_operation-maintenance-and-parts-manual_1551171061.webp)
Maintenance and Adjustments
61-900040-000
Rev. Date:
01/22
4-7
2. Pinch off the tubing on both sides of the filter assembly. When filter is disassembled,
some cleaner will drain from it.
Caution: To prevent spills from occurring, place
bowl or cloth beneath the filter to catch all fluid.
3. Remove the bowl and screen by unscrewing the bottom of the filter assembly. If filter
is removed from the support brackets, be sure to pay attention to the flow direction.
The arrow should be pointing towards the line that goes into the pump while it
receives from cleaner tank.
4. Clean the bowl and screen under running water.
5. Reassemble the screen and bowl.
6. Remove the clamps from the tubing and check for leaks.
7. Wipe up any spills.
4.2.4 Checking the Waste Tank Seal
The vacuum pump to waste tank seal plays a critical role in the cleaning function of the
Phoenix LT4 and should be inspected weekly. Any nicks or cuts, bent or rolled edges,
excessively frayed or abraded areas, or lack of adhesion to the vacuum pump will impede
the cleaning function. Refer to Section 4.4.4
–
Replacing the Waste Tank Seal
.
Additionally, any gap between the seal and waste tank will adversely affect cleaning
efficiency. If a gap exists, refer to Section 4.3.6
–
Adjusting the Vacuum Motor Position
.
4.2.5 Cleaning the Waste Tank
The waste tank should be rinsed out after each use and it should also be cleaned weekly
by completing the steps below. Perform these steps with the machine in the
operating
position.
1.
Disconnect the vacuum hose and remove the waste tank from the Phoenix LT4.
2.
Pour a few drops of cleaner into the waste tank and add water until the waste tank
is about half full.
3.
Carefully swish around the solution in the waste tank. Be sure to get the upper
corners and around the intake opening.
4.
Empty the cleaning solution from the waste tank. Do NOT dump recovery tank in a
septic tank or sanitary sewer system. Follow your local environmental regulations
for the best method of disposal. Rinse the waste tank under running water.
5.
Rinse the waste tank under running water until the water runs clear.
6.
Reinstall the waste tank in the Phoenix LT4 and reconnect the vacuum hose.