![background image](http://html.mh-extra.com/html/phoenix/lt4/lt4_operation-maintenance-and-parts-manual_1551171009.webp)
Safety Information
61-900040-000
Rev. Date:
01/22
1-3
IMPORTANT SAFETY INFORMATION
WARNING! The following basic safety-related items must be followed in order to
ensure the safe operation of the lane machine. Failure to follow these precautions
could result in serious personal injury, damage to the lane machine, or both.
Read this instruction manual before using this machine.
This machine is to be operated by authorized and adequately instructed
personnel only. Prevent unauthorized use by turning off power, pressing the
emergency stop switch and removing the key when the machine is not in use.
Ensure the pinspotters for the lanes you are conditioning are turned off.
The only authorized use of this machine is to clean and condition the
surface of bowling lanes. DO NOT use for any other purpose.
DO NOT use this machine to pick up hazardous dust such as the residue
from resurfacing lanes.
This lane machine is very heavy. If necessary, obtain the assistance of a
second person when transferring the machine between the operating and
storage positions. Exercise care to prevent the machine from tipping when
moving the machine while it is in the upright position.
ALWAYS operate the lane machine on a dedicated and grounded electrical
circuit of the proper voltage.
Inspect the power cord prior to each use. DO NOT operate this machine
with a damaged power cord or plug.
DO NOT allow the lane machine to run over the power cord.
Unplug and inspect the power cord for damage if the machine runs over the
power cord. Should the power cord become entangled in the machine,
unplug the power cord from the bowling center’s electrical receptacle before
attempting to clear the power cord from the machine.
DO NOT use any other power cord in place of, or in addition to, the one
provided. Replacement power cords are available from Brunswick. (see
Section 7 -
Parts
of this manual).
Disconnect the power cord when cleaning, replacing parts, or performing
maintenance.
DO NOT operate the lane machine on a lane when someone is working on
the lane or in the vicinity of the pinspotter.
DO NOT operate the lane machine with a hood assembly open or removed
except when required to make adjustments
!