Determining The Oil Pattern
61-900040-000
Rev. Date:
01/22
6-13
their oil output eliminates the problem. If the problem persists,
the buffer brush may need to be replaced.
If the brush has been contaminated with grease, remove and
clean. If issue persists, replace the buffer brush.
For more information about the buffer brush, refer to Section 4 -
Maintenance and Adjustments
.
Washboard or
Corrugated Pattern In
The Buffed Area
If a washboard or corrugated pattern occurs in both the oiled
area and the buffed area, correct the condition in the oiled
area first which may also correct the condition in the buffed
area.
If the washboard or corrugated pattern occurs only in the
buffed area, it is caused by too little oil in the brush after
applying oil in the oiled area. To correct the condition,
increase the buffer brush pressure. Refer to Section 4.3.1
–
Adjusting the Buffer Brush Pressure
.