![background image](http://html.mh-extra.com/html/phoenix/lt4/lt4_operation-maintenance-and-parts-manual_1551171035.webp)
Operation
61-900040-000
Rev. Date:
01/22
3-13
If Auto Back is selected, the machine will use the last lane distance reading before the error
and return itself to the foul line. A screen similar to the one shown in Figure 3- 25 will be
displayed when Auto Back is selected.
Error Code 2 - End of Lane
The End of Lane error, shown in Figure 3- 26, can
occur under two circumstances. The first is the
detection of the end of the lane outside the normal
range of 52 to 65 feet. The second could be loss of
signal from the optical sensor either due to a faulty
sensor or becoming disconnected from the control box.
Error Code 3 - E-STOP
When the E-STOP button is depressed (indicated by no
yellow showing behind the button) or the cover is lifted
or removed, the error message shown in Figure 3- 27
will appear on the screen. When an E-STOP error
occurs, all machine operations are stopped and cannot
be restarted.
To reset the machine do the following:
If the error was caused by the E-STOP button being depressed, insert the key into the
E-STOP switch and turn (the button should pop back out and the yellow sticker behind it
should be visible) then turn the power switch off then on.
If the error was caused by opening or removing the cover, close or reinstall the cover and
turn the power switch off then on.
Internal Error
The internal error, shown in Figure 3- 28, occurs if
there is an interruption of communication inside the
control box between the logic and relay boards. If this
error occurs, turn the power switch off then on. If the
error is cleared the machine is okay for operation.
If it reoccurs, contact the Brunswick Customer
Response Center at 1-800-YES-BOWL (1-800-937-
2695). Additionally, Technical Support can be
reached by e-mail at [email protected] or
fax at 1-231-725-4667.
Figure 3- 27
Figure 3- 26
Figure 3- 28