Phoenix Contact Nanoline NLC-035-024D-04I-02QRD-05A, User Manual

Page: 70 / 134

Nanoline
66
PHOENIX CONTACT 2338_en_O
Menu + <2>
When in Run mode, press the Menu and <2> keys together to set the timeout value of the
screen. Use the numeric keys to enter a value between 0 and 99 minutes, where 0 is always
on. Press the <OK> key to save the settings. Press the <Menu back> key to cancel the
changes.
Figure 5-5 Timeout settings
Menu + <3>
When in Run mode, press the Menu and <3> keys together to configure the serial settings
of the Operator Panel. Press the 1 key to configure the settings or press the 2 key to reset
the device to the factory default settings.
When configuring the port settings, use the

or

keys to navigate between the fields and
use the

or

keys to select from the available menu choices.
Figure 5-6 Serial port settings
The factory default settings are:
Press the <OK> key to save the settings. Press the <Menu back> key to cancel the
changes.
Baud rate 115200
Parity Odd
Stop Bits 1